1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
Sourcing intelligence platforms-APP, download it now, new users will receive a novice gift pack.
1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
HS code-led regulatory frameworks
author: 2024-12-23 23:21How to comply with origin rules
author: 2024-12-23 22:28Top import export compliance guides
author: 2024-12-23 21:28Global trade data harmonization
author: 2024-12-23 21:20Real-time cargo tracking solutions
author: 2024-12-23 21:09Predictive supply chain resilience
author: 2024-12-23 23:43Maritime logistics HS code mapping
author: 2024-12-23 23:40Global trade lead generation tools
author: 2024-12-23 23:16HS code verification for exporters
author: 2024-12-23 23:00Automotive supply chain transparency tools
author: 2024-12-23 22:34414.91MB
Check725.36MB
Check278.18MB
Check898.84MB
Check428.82MB
Check467.56MB
Check422.99MB
Check126.24MB
Check918.94MB
Check627.71MB
Check649.69MB
Check627.92MB
Check195.18MB
Check432.36MB
Check243.48MB
Check851.28MB
Check927.71MB
Check251.19MB
Check795.79MB
Check698.93MB
Check329.42MB
Check916.82MB
Check447.45MB
Check657.52MB
Check136.49MB
Check156.84MB
Check823.98MB
Check749.51MB
Check541.47MB
Check439.64MB
Check566.78MB
Check659.39MB
Check742.68MB
Check319.32MB
Check128.44MB
Check114.44MB
CheckScan to install
Sourcing intelligence platforms to discover more
Netizen comments More
1995 Textile finishing HS code analysis
2024-12-23 23:34 recommend
2120 international trade database
2024-12-23 22:30 recommend
2148 HS code-based commodity chain analysis
2024-12-23 21:49 recommend
1592 Pet feed HS code verification
2024-12-23 21:28 recommend
1802 How to optimize shipping schedules
2024-12-23 21:19 recommend