Body parameters Dongfeng Fengshen The length of the whole vehicle of s30 is 4258mm, the width of the whole vehicle is 1730mm, and the height of the whole vehicle is 1515mm. The wheelbase of the car is 2550mm, and the minimum ground clearance is 135mm.The rear seat adopts a 40/60 split design and supports the rear seat folding function.
The engine of Dongfeng Fengshen S30 adopts a 16-liter 16-vale TU5JP4 engine, with a maximum power of 78KW and a maximum torque of 142NM. The engine is a small high-efficiency and low-energy engine developed by Peugeot Citroen of France. The characteristics of this engine are Only high speed can give full play to its better power performance, and it is relatively.
In terms of power, the Fengshen S30 is equipped with a 6L engine produced by PSA in France. First of all, in terms of displacement, the 6L is the hottest gold displacement in the market at present, which lays a good foundation for the future market of Fengshen S30.
Introduction to the configuration of Dongfeng Fengshen S30: The front suspension of Dongfeng Fengshen S30 is the most common suspension of the Macpherson independent suspension.The retractable inflatable two-way hydraulic vibration damper and transverse stabilizer of Dongfeng Fengshen Automobile increase the elasticity coefficient, improve the elasticity, and can better cope with various driving conditions.
The Fengshen S30 adopts a 6L double overhead camshaft 16-valve naturally aspirated engine (produced by Shenlong Company in China) provided by PSA in France. Its maximum output power is 78kW/5750rpm, and the peak torque reaches 142N·m/4000rpm.
And it is more fuel-efficient. The length, width and height of Dongfeng Fengshen s30 are 4526mm, 1740mm and 1465mm respectively, and the wheelbase is 2610mm. The body type is a 4-door 5-seat sedan, the gearbox is a 5-speed manual, the maximum speed is 188 kilometers per hour, the drive mode is front-wheel drive, and the steering assistance type is electric assistance. Force.
1. In general, Dongfeng Fengshen S30 is In terms of cost performance, the body structure is solid, the power and handling performance are also relatively stable, and the main and passive safety is relatively high. But it is still necessary to improve the braking effect and reduce the noise of the cockpit.
2. Dongfeng Fengshen s30 also does a good job in terms of safety performance. It is equipped with a series of active and passive safety configurations such as ABS+EBD, electronic anti-lock braking system and reversing radar. At the same time, its body also adopts a high-strength steel structure with a stable body structure.
3. In summary, as an intermediate car, the quality performance of Dongfeng Fengshen S30 is relatively excellent. Whether in terms of body structure, power performance or configuration, it can provide consumers with safer and more reliable car options.
4. Dongfeng Fengshen S30 has good performance, good cost-effectiveness, and can be considered. 1 The design of the whole car is highly original. The appearance is full of distinctive personality and the interior atmosphere is in line with the price and identity. The workmanship and texture are reasonable from PS.A's engine technology is mature, and maintenance has cost advantages. 2 The space in the car is relatively ideal for the ergonomic design of the front and rear seats.
5. The interior space of Dongfeng Fengshen S30 dual-fuel is quite spacious, and the ride comfort is also very high. The seats are made of comfortable materials, and the ergonomic planning takes into account the fatigue of the driving passengers after a long time. In addition, the central console is simple and easy to operate, and it is easy for first-time users to use.
1. The a30 is Dongfeng Fengshen A30. Dongfeng Fengshen A30 is equipped with a high-efficiency and energy-TECODFMA15 all-aluminum engine with a maximum power of 8 5kW, the maximum torque is 145N.M/rpm; Dongfeng Fengshen A30 is a brand-new independent DF1 platform.
2. Dongfeng Fengshen A30 is equipped with a self-developed 5L naturally aspirated engine code-named DFMA15, with a maximum output power of 85kW and a peak torque of 145Nm. From the data point of view, it can fully meet the needs of daily use. It is matched with a 4-speed manual automatic transmission or a 5-speed manual transmission.
3. Dongfeng Company's A30 has always been an A15 engine independently developed by Dongfeng Fengshen.
4. Dongfeng Fengshen A30: advantages: low fuel consumption; large space in the car; beautiful and fashionable appearance; good muting effect. Disadvantages: There is no fender and makeup mirror; the rear seat is integral and cannot be placed flat; the shock absorption effect is average.
5. It is not a joint venture car, it is not a Japanese engine, it is a self-developed engine, but the core parts are still Japanese goods. Whether you are Mercedes-Benz, BMW, Audi or Porsche, especially the three key components of electronic control components, electronic control modules and automatic transmissions, the world is almost monopolized by Japan.
6. Dongfeng Fengshen a60 displacement 1·5 and Dongfeng Fengshen a30 displacement 1·5 engines are exactly the same, which belong to the engines independently developed by Dongfeng Fengshen.
HS code-based risk profiling for exporters-APP, download it now, new users will receive a novice gift pack.
Body parameters Dongfeng Fengshen The length of the whole vehicle of s30 is 4258mm, the width of the whole vehicle is 1730mm, and the height of the whole vehicle is 1515mm. The wheelbase of the car is 2550mm, and the minimum ground clearance is 135mm.The rear seat adopts a 40/60 split design and supports the rear seat folding function.
The engine of Dongfeng Fengshen S30 adopts a 16-liter 16-vale TU5JP4 engine, with a maximum power of 78KW and a maximum torque of 142NM. The engine is a small high-efficiency and low-energy engine developed by Peugeot Citroen of France. The characteristics of this engine are Only high speed can give full play to its better power performance, and it is relatively.
In terms of power, the Fengshen S30 is equipped with a 6L engine produced by PSA in France. First of all, in terms of displacement, the 6L is the hottest gold displacement in the market at present, which lays a good foundation for the future market of Fengshen S30.
Introduction to the configuration of Dongfeng Fengshen S30: The front suspension of Dongfeng Fengshen S30 is the most common suspension of the Macpherson independent suspension.The retractable inflatable two-way hydraulic vibration damper and transverse stabilizer of Dongfeng Fengshen Automobile increase the elasticity coefficient, improve the elasticity, and can better cope with various driving conditions.
The Fengshen S30 adopts a 6L double overhead camshaft 16-valve naturally aspirated engine (produced by Shenlong Company in China) provided by PSA in France. Its maximum output power is 78kW/5750rpm, and the peak torque reaches 142N·m/4000rpm.
And it is more fuel-efficient. The length, width and height of Dongfeng Fengshen s30 are 4526mm, 1740mm and 1465mm respectively, and the wheelbase is 2610mm. The body type is a 4-door 5-seat sedan, the gearbox is a 5-speed manual, the maximum speed is 188 kilometers per hour, the drive mode is front-wheel drive, and the steering assistance type is electric assistance. Force.
1. In general, Dongfeng Fengshen S30 is In terms of cost performance, the body structure is solid, the power and handling performance are also relatively stable, and the main and passive safety is relatively high. But it is still necessary to improve the braking effect and reduce the noise of the cockpit.
2. Dongfeng Fengshen s30 also does a good job in terms of safety performance. It is equipped with a series of active and passive safety configurations such as ABS+EBD, electronic anti-lock braking system and reversing radar. At the same time, its body also adopts a high-strength steel structure with a stable body structure.
3. In summary, as an intermediate car, the quality performance of Dongfeng Fengshen S30 is relatively excellent. Whether in terms of body structure, power performance or configuration, it can provide consumers with safer and more reliable car options.
4. Dongfeng Fengshen S30 has good performance, good cost-effectiveness, and can be considered. 1 The design of the whole car is highly original. The appearance is full of distinctive personality and the interior atmosphere is in line with the price and identity. The workmanship and texture are reasonable from PS.A's engine technology is mature, and maintenance has cost advantages. 2 The space in the car is relatively ideal for the ergonomic design of the front and rear seats.
5. The interior space of Dongfeng Fengshen S30 dual-fuel is quite spacious, and the ride comfort is also very high. The seats are made of comfortable materials, and the ergonomic planning takes into account the fatigue of the driving passengers after a long time. In addition, the central console is simple and easy to operate, and it is easy for first-time users to use.
1. The a30 is Dongfeng Fengshen A30. Dongfeng Fengshen A30 is equipped with a high-efficiency and energy-TECODFMA15 all-aluminum engine with a maximum power of 8 5kW, the maximum torque is 145N.M/rpm; Dongfeng Fengshen A30 is a brand-new independent DF1 platform.
2. Dongfeng Fengshen A30 is equipped with a self-developed 5L naturally aspirated engine code-named DFMA15, with a maximum output power of 85kW and a peak torque of 145Nm. From the data point of view, it can fully meet the needs of daily use. It is matched with a 4-speed manual automatic transmission or a 5-speed manual transmission.
3. Dongfeng Company's A30 has always been an A15 engine independently developed by Dongfeng Fengshen.
4. Dongfeng Fengshen A30: advantages: low fuel consumption; large space in the car; beautiful and fashionable appearance; good muting effect. Disadvantages: There is no fender and makeup mirror; the rear seat is integral and cannot be placed flat; the shock absorption effect is average.
5. It is not a joint venture car, it is not a Japanese engine, it is a self-developed engine, but the core parts are still Japanese goods. Whether you are Mercedes-Benz, BMW, Audi or Porsche, especially the three key components of electronic control components, electronic control modules and automatic transmissions, the world is almost monopolized by Japan.
6. Dongfeng Fengshen a60 displacement 1·5 and Dongfeng Fengshen a30 displacement 1·5 engines are exactly the same, which belong to the engines independently developed by Dongfeng Fengshen.
US-China trade data comparisons
author: 2024-12-23 23:37Agriculture trade data by HS code
author: 2024-12-23 22:18Global tariff databases by HS code
author: 2024-12-23 21:54HS code-based competitor benchmarking
author: 2024-12-23 21:09How to reduce transit time variability
author: 2024-12-23 23:34Germany international trade insights
author: 2024-12-23 22:29Refined sugar HS code identification
author: 2024-12-23 22:00HS code-driven risk management frameworks
author: 2024-12-23 21:49873.81MB
Check435.82MB
Check533.86MB
Check368.24MB
Check928.41MB
Check839.36MB
Check819.54MB
Check791.25MB
Check666.15MB
Check522.58MB
Check693.46MB
Check565.94MB
Check657.14MB
Check567.21MB
Check918.95MB
Check229.39MB
Check547.53MB
Check446.24MB
Check329.98MB
Check311.22MB
Check881.88MB
Check848.48MB
Check649.48MB
Check562.12MB
Check212.33MB
Check622.45MB
Check322.93MB
Check325.17MB
Check665.23MB
Check942.38MB
Check544.31MB
Check227.72MB
Check163.45MB
Check428.47MB
Check978.25MB
Check836.32MB
CheckScan to install
HS code-based risk profiling for exporters to discover more
Netizen comments More
1433 HS code-driven export incentives
2024-12-23 23:43 recommend
2724 Trade data-driven investment strategies
2024-12-23 23:39 recommend
897 HS code-based compliance checks for EU
2024-12-23 23:21 recommend
2555 Dynamic import export data modeling
2024-12-23 21:59 recommend
1339 Dynamic supplier inventory analysis
2024-12-23 21:13 recommend