D's full English name is drive, which represents the forward gear. When the gear is in this position, the car can move forward. At the same time, the automatic transmission under the gear will automatically change gear according to the speed and throttle, instead of stepping on the clutch like a handcar, which is much simpler and more convenient to operate. Generally, this gear is used for normal driving.
N gear is idle, which is used when the vehicle is stopped. R gear is a reverse gear, and you can only enter this gear when the car is completely stationary. P gear is a parking gear, which is used when the engine is turned off or the car is stationary. S is the second gear, which strengthens the power and enters the sports mode.
The letters on the gear of automatic transmission cars are P, R, N, D, S and L, which represent parking gear, reverse gear, idle gear, forward gear, sports gear and low gear respectively.P parking gear Automatic transmission P stands for Park, which means parking in Chinese, so P gear is also called parking gear. When the vehicle is in P gear, it plays the role of fixing the vehicle.
N is neutral, temporarily stop and hang into this gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. D is the forward gear (Drive), the most commonly used gear, which can be completed through throttle control when the gear needs to be raised and lowered.
r: It's a reverse gear. When it is in this gear, the reverse oil line of the hydraulic system will be turned on, so that the drive wheel will reverse and drive in reverse. N gear: it is an empty gear. When it is put into idle gear, the planetary gear system will idle and cannot output power. D: It's a forward gear.
Explanation of automatic transmission gears The gears of automatic transmission cars include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc. P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing.
1. For the illustration introduced in the automatic transmission gear, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear). 2. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: This gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. 3. Automatic transmission carThe explanation of the gear is as follows: D gear: This is the most commonly used gear in automatic gear models. There are usually three types of DDD3, similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle. 4. The automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same. 5. Explanation of the gear of the automatic transmission car The gears of the automatic transmission car include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc.P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing. 1. There are three types of car gears: manual gear: generally 5 forward gears + one reverse gear. In the past, cars were all 4+1. Now some high-end cars, such as Mazda 6 manual, have 6 forward gears + one reverse gear. 2. Automatic car gears include P gear (parking gear), R gear (reverse gear), N gear (idle gear), D gear (forward gear), S gear (sports mode), and there is also a reverse gear button on the handle (used with R gear). 3. Car gears include P, R, N, D, 2 (or S), L (or 1), etc.1st gear: It is the L gear of some models, and it is also a steep slope gear. It is used when the car climbs uphill or has great resistance. When using the 1st gear, the speed of the car is low. 2nd gear: It is a forward shift gear, and the wave box can be changed between 1st and 2nd gears. 4. There are six gears on ordinary automatic transmission cars, from top to bottom: P, R, N, D, S, L. 5, P-Parking, parking gear, start gear. When parking is not used, the gear is here. At this time, the wheel is in a mechanical dead state, which can prevent slipping. R-Reverse, reverse gear. It is used when reversing. N-Neutral, neutral. Use this gear when parking temporarily (such as a red light). L gear: This gear can be used when going downhill or uphill, which can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. However, now most cars do not have L gear, and more M gear is used. P file: The word represented by P is: Park, which means "parking, parking" in Chinese. This gear, also known as "parking gear", is the gear that is hung when parking. R gear: The word represented by R is: Reverse, which means "reverse, opposite and reverse gear" in Chinese. R gear: reverse position. Move the shift lever to that position when reversing. After the car is completely stopped, the shift lever can be moved to this position.N gear: idle position. When the gear lever is moved to this position, the gearbox does not fit into any gear. After the shift lever is moved to this position, no power is transmitted to the wheels, and the braking function of the engine cannot be used. Car gears are divided into automatic transmission gears and manual transmission gears. The gears of automatic transmission are divided into P, R, N, D, 1 or L, etc. P(Parking): It is used for parking, which uses mechanical devices to lock the turning part of the car so that the car cannot move. What do so many gears on the automatic transmission mean? First, P block. The P gear is a parking gear. There is no such gear on the manual transmission car, so special attention should be paid to the use of this gear when driving an automatic transmission car. It is often a gear used only when the vehicle reaches the destination and the driver needs to get off the car. What are the gears of the car?
Car gear introduction
HS code-driven risk management frameworks-APP, download it now, new users will receive a novice gift pack.
D's full English name is drive, which represents the forward gear. When the gear is in this position, the car can move forward. At the same time, the automatic transmission under the gear will automatically change gear according to the speed and throttle, instead of stepping on the clutch like a handcar, which is much simpler and more convenient to operate. Generally, this gear is used for normal driving.
N gear is idle, which is used when the vehicle is stopped. R gear is a reverse gear, and you can only enter this gear when the car is completely stationary. P gear is a parking gear, which is used when the engine is turned off or the car is stationary. S is the second gear, which strengthens the power and enters the sports mode.
The letters on the gear of automatic transmission cars are P, R, N, D, S and L, which represent parking gear, reverse gear, idle gear, forward gear, sports gear and low gear respectively.P parking gear Automatic transmission P stands for Park, which means parking in Chinese, so P gear is also called parking gear. When the vehicle is in P gear, it plays the role of fixing the vehicle.
N is neutral, temporarily stop and hang into this gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. D is the forward gear (Drive), the most commonly used gear, which can be completed through throttle control when the gear needs to be raised and lowered.
r: It's a reverse gear. When it is in this gear, the reverse oil line of the hydraulic system will be turned on, so that the drive wheel will reverse and drive in reverse. N gear: it is an empty gear. When it is put into idle gear, the planetary gear system will idle and cannot output power. D: It's a forward gear.
Explanation of automatic transmission gears The gears of automatic transmission cars include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc. P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing.
1. For the illustration introduced in the automatic transmission gear, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear). 2. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: This gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. 3. Automatic transmission carThe explanation of the gear is as follows: D gear: This is the most commonly used gear in automatic gear models. There are usually three types of DDD3, similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle. 4. The automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same. 5. Explanation of the gear of the automatic transmission car The gears of the automatic transmission car include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc.P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing. 1. There are three types of car gears: manual gear: generally 5 forward gears + one reverse gear. In the past, cars were all 4+1. Now some high-end cars, such as Mazda 6 manual, have 6 forward gears + one reverse gear. 2. Automatic car gears include P gear (parking gear), R gear (reverse gear), N gear (idle gear), D gear (forward gear), S gear (sports mode), and there is also a reverse gear button on the handle (used with R gear). 3. Car gears include P, R, N, D, 2 (or S), L (or 1), etc.1st gear: It is the L gear of some models, and it is also a steep slope gear. It is used when the car climbs uphill or has great resistance. When using the 1st gear, the speed of the car is low. 2nd gear: It is a forward shift gear, and the wave box can be changed between 1st and 2nd gears. 4. There are six gears on ordinary automatic transmission cars, from top to bottom: P, R, N, D, S, L. 5, P-Parking, parking gear, start gear. When parking is not used, the gear is here. At this time, the wheel is in a mechanical dead state, which can prevent slipping. R-Reverse, reverse gear. It is used when reversing. N-Neutral, neutral. Use this gear when parking temporarily (such as a red light). L gear: This gear can be used when going downhill or uphill, which can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. However, now most cars do not have L gear, and more M gear is used. P file: The word represented by P is: Park, which means "parking, parking" in Chinese. This gear, also known as "parking gear", is the gear that is hung when parking. R gear: The word represented by R is: Reverse, which means "reverse, opposite and reverse gear" in Chinese. R gear: reverse position. Move the shift lever to that position when reversing. After the car is completely stopped, the shift lever can be moved to this position.N gear: idle position. When the gear lever is moved to this position, the gearbox does not fit into any gear. After the shift lever is moved to this position, no power is transmitted to the wheels, and the braking function of the engine cannot be used. Car gears are divided into automatic transmission gears and manual transmission gears. The gears of automatic transmission are divided into P, R, N, D, 1 or L, etc. P(Parking): It is used for parking, which uses mechanical devices to lock the turning part of the car so that the car cannot move. What do so many gears on the automatic transmission mean? First, P block. The P gear is a parking gear. There is no such gear on the manual transmission car, so special attention should be paid to the use of this gear when driving an automatic transmission car. It is often a gear used only when the vehicle reaches the destination and the driver needs to get off the car. What are the gears of the car?
Car gear introduction
Predictive analytics in international trade
author: 2024-12-24 03:02How to interpret complex trade patterns
author: 2024-12-24 02:17How to leverage trade data in negotiations
author: 2024-12-24 01:38Sourcing intelligence from customs data
author: 2024-12-24 01:33Industrial chemicals HS code monitoring
author: 2024-12-24 01:17How to forecast seasonal import demands
author: 2024-12-24 02:09HS code-based KPI reporting for trade teams
author: 2024-12-24 01:19WTO harmonization and HS codes
author: 2024-12-24 00:50
Non-tariff barriers by HS code
234.12MB
Check
HS code-based data mining for analytics
844.56MB
Check
HS code-based commodity chain analysis
736.11MB
Check
HS code-based data mining for analytics
956.92MB
Check
HS code automotive parts mapping
549.22MB
Check
Food additives HS code classification
336.47MB
Check
Trade flow analysis software
574.32MB
Check
HS code-driven tariff arbitrage strategies
692.91MB
Check
Analytical tools for trade diversification
187.16MB
Check
HS code compliance in the USA
834.19MB
Check
How to map complex products to HS codes
616.89MB
Check
Dynamic trade data cleansing
112.74MB
Check
How to identify emerging market suppliers
859.72MB
Check
HS code for artisanal goods
591.87MB
Check
Trade data-driven contract negotiations
617.39MB
Check
Dried fruits HS code classification
965.22MB
Check
Industry-specific trade data filters
451.22MB
Check
Industry-specific trade growth forecasts
287.98MB
Check
HS code compliance for African Union members
988.42MB
Check
How to find authorized economic operators
698.64MB
Check
HS code-driven margin analysis
596.69MB
Check
Real-time shipment inspection data
483.43MB
Check
Global trade data
945.83MB
Check
End-to-end shipment management
258.97MB
Check
Customized HS code dashboards
553.12MB
Check
How to understand INCOTERMS with data
348.15MB
Check
How to leverage analytics in procurement
174.29MB
Check
Global commodity price tracking
883.13MB
Check
HS code-based data mining for analytics
139.41MB
Check
HS code verification for exporters
829.51MB
Check
Dynamic customs duty calculation
955.19MB
Check
High-value machinery HS code classification
764.44MB
Check
Global trade duty recovery strategies
257.12MB
Check
How to capitalize on trade incentives
539.67MB
Check
HS code-based value chain optimization
999.56MB
Check
HS code indexing for procurement catalogs
833.39MB
Check
Scan to install
HS code-driven risk management frameworks to discover more
Netizen comments More
1096 HS code-based FTA utilization
2024-12-24 03:15 recommend
326 Real-time cargo route adjustments
2024-12-24 02:12 recommend
2772 How to select the best trade data provider
2024-12-24 01:58 recommend
963 HS code-based FTA utilization
2024-12-24 01:08 recommend
2414 Predictive container utilization analytics
2024-12-24 00:57 recommend