Granular HS code detail for compliance officers

List of contents of this article:

• 1,Granular HS code detail for compliance officers What are the steps to reinstall the computer system?
• 2, Desktop computer system reinstall system key operation
• 3, How to reinstall the system on Lenovo desktop
• 4, desktop reinstall system teaching Process

What are the steps to reinstall the computer system?

Step two, install the XP system from the CD. Put the XP installation CD before restarting. When you see the CD word at the bottom of the screen, press Enter. Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.

Download the ISO image (2) Use the UltraISO file to write the system ISO to the USB flash drive.(3) Adjust the USB flash drive to the first startup item on the BIOS interface (you can also use the computer USB flash drive to start the hotkey). ( 4) Insert the USB flash drive and restart the computer, and you will automatically enter the installation interface of the installer. Follow the prompts to complete the installation.

In this case, there is generally a problem with the system, and reinstalling the operating system can return to normal. Insert the system disk and insert the system disk (system CD-ROM and system USB flash drive) into the computer. Set the BIOS to restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS.

If you want to reinstall your computer's operating system, you need to prepare an installation disk, usually a DVD or a USB flash drive. Next, you can follow these steps to reinstall: prepare the installation disk, insert the installation disk into the computer, and then start the computer.

Desktop computer system reinstall system key operation

After power-on, press and hold the Esc key in the upper left corner of the keyboard until the following interface is displayed. Move the cursor to the Computer Setup (F10) menu and return.

The specific steps for reinstalling the computer system settings are as follows: long press the power button of the computer until the computer is turned off, and then press the power button again to start the computer. Press and hold the Command, Option and R keys at the same time as soon as you hear the computer startup sound.

HP computer reinstall system 1hp computer has a special function, that is, press the Esc key, and the startup menu will appear.The function of each key in the menu as shown in the figure has its description. 2 Press F9 directly to enter the selection interface of the boot device. You can also enter the BIOS menu with F10 to set 3 and select usb hard.

There are two ways to install the system with a USB flash drive on a desktop computer: the first method: plug the USB flash drive into the USB port of your computer, and press the F2 key or DEL key when starting up to enter the BIOS system; Note: Depending on the machine model, the button to enter the BIOS may be different.

First, we need to enter the BIOS setting interface of the computer. After power-on, press the F2 key or F12 key (different computer models may be different, and you can see the prompt message when you turn it on) to enter the BIOS setting interface. In the BIOS setting interface, we need to find the Boot Sequence option.

Asus notebook reinstalls the system through the system CD-ROM or USB flash drive. Press the ESC key, and then choose to start the installation from the DVD optical drive or USB item. 2 If your computer is factory pre-installed with win7 or win8 system, you can start up and press the F9 key to restore the system and pre-install the win7 system machine. The specific method of restoring the factory system is to see the word asus when starting up.

How to reinstall the system on Lenovo desktop

1. Lenovo desktop cannot restore the factory settings through the partition, and must use the system installation disk to reinstall the operating system. Use the computer's optical drive or USB flash drive to make a Windows system installation disk. You can download the system image file from the official website, and then burn or make a boot USB disk.

2. Most Lenovo computers need to press the F12 key to reinstall the system, and a few models need to press the Novo key. After pressing the F12 key, the boot management menu Boot Manger will appear, in which the DVD option is the CD, and the USB HDD or USB disk name is the USB disk boot item. Move the cursor and press Enter.

3. There are many ways to reinstall the system on a desktop computer. If the built-in system can still work normally, it is recommended to install the system method on the hard disk; if the built-in system does not work normally or the card is slow, it is recommended to use a system CD-ROM or USB flash drive to reinstall the system.

Desktop Reinstallation System Tutorial

Then open the network installation tool, click one-click to reinstall the system, and then the system willAutomatically detect the current installation environment, and then you need to select the system version you want to install. After the selection is completed, click Next.

There are many ways to reinstall the desktop computer system. The following are the commonly used methods, and you can choose one operation.

Next, the editor will teach you a simple tutorial for reinstalling the system suitable for old desktops. The specific steps are as follows: download and install the Xiaobai three-step installation version of the tool directly on the desktop. You can choose the intelligent recommendation system, and the software will recommend according to the computer configuration.