D's full English name is drive, which represents the forward gear. When the gear is in this position, the car can move forward. At the same time, the automatic transmission under the gear will automatically change gear according to the speed and throttle, instead of stepping on the clutch like a handcar, which is much simpler and more convenient to operate. Generally, this gear is used for normal driving.
N gear is idle, which is used when the vehicle is stopped. R gear is a reverse gear, and you can only enter this gear when the car is completely stationary. P gear is a parking gear, which is used when the engine is turned off or the car is stationary. S is the second gear, which strengthens the power and enters the sports mode.
The letters on the gear of automatic transmission cars are P, R, N, D, S and L, which represent parking gear, reverse gear, idle gear, forward gear, sports gear and low gear respectively.P parking gear Automatic transmission P stands for Park, which means parking in Chinese, so P gear is also called parking gear. When the vehicle is in P gear, it plays the role of fixing the vehicle.
N is neutral, temporarily stop and hang into this gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. D is the forward gear (Drive), the most commonly used gear, which can be completed through throttle control when the gear needs to be raised and lowered.
r: It's a reverse gear. When it is in this gear, the reverse oil line of the hydraulic system will be turned on, so that the drive wheel will reverse and drive in reverse. N gear: it is an empty gear. When it is put into idle gear, the planetary gear system will idle and cannot output power. D: It's a forward gear.
Explanation of automatic transmission gears The gears of automatic transmission cars include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc. P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing.
1. For the illustration introduced in the automatic transmission gear, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear). 2. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: This gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. 3. Automatic transmission carThe explanation of the gear is as follows: D gear: This is the most commonly used gear in automatic gear models. There are usually three types of DDD3, similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle. 4. The automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same. 5. Explanation of the gear of the automatic transmission car The gears of the automatic transmission car include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc.P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing. 1. There are three types of car gears: manual gear: generally 5 forward gears + one reverse gear. In the past, cars were all 4+1. Now some high-end cars, such as Mazda 6 manual, have 6 forward gears + one reverse gear. 2. Automatic car gears include P gear (parking gear), R gear (reverse gear), N gear (idle gear), D gear (forward gear), S gear (sports mode), and there is also a reverse gear button on the handle (used with R gear). 3. Car gears include P, R, N, D, 2 (or S), L (or 1), etc.1st gear: It is the L gear of some models, and it is also a steep slope gear. It is used when the car climbs uphill or has great resistance. When using the 1st gear, the speed of the car is low. 2nd gear: It is a forward shift gear, and the wave box can be changed between 1st and 2nd gears. 4. There are six gears on ordinary automatic transmission cars, from top to bottom: P, R, N, D, S, L. 5, P-Parking, parking gear, start gear. When parking is not used, the gear is here. At this time, the wheel is in a mechanical dead state, which can prevent slipping. R-Reverse, reverse gear. It is used when reversing. N-Neutral, neutral. Use this gear when parking temporarily (such as a red light). L gear: This gear can be used when going downhill or uphill, which can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. However, now most cars do not have L gear, and more M gear is used. P file: The word represented by P is: Park, which means "parking, parking" in Chinese. This gear, also known as "parking gear", is the gear that is hung when parking. R gear: The word represented by R is: Reverse, which means "reverse, opposite and reverse gear" in Chinese. R gear: reverse position. Move the shift lever to that position when reversing. After the car is completely stopped, the shift lever can be moved to this position.N gear: idle position. When the gear lever is moved to this position, the gearbox does not fit into any gear. After the shift lever is moved to this position, no power is transmitted to the wheels, and the braking function of the engine cannot be used. Car gears are divided into automatic transmission gears and manual transmission gears. The gears of automatic transmission are divided into P, R, N, D, 1 or L, etc. P(Parking): It is used for parking, which uses mechanical devices to lock the turning part of the car so that the car cannot move. What do so many gears on the automatic transmission mean? First, P block. The P gear is a parking gear. There is no such gear on the manual transmission car, so special attention should be paid to the use of this gear when driving an automatic transmission car. It is often a gear used only when the vehicle reaches the destination and the driver needs to get off the car. What are the gears of the car?
Car gear introduction
Automotive supply chain HS code checks-APP, download it now, new users will receive a novice gift pack.
D's full English name is drive, which represents the forward gear. When the gear is in this position, the car can move forward. At the same time, the automatic transmission under the gear will automatically change gear according to the speed and throttle, instead of stepping on the clutch like a handcar, which is much simpler and more convenient to operate. Generally, this gear is used for normal driving.
N gear is idle, which is used when the vehicle is stopped. R gear is a reverse gear, and you can only enter this gear when the car is completely stationary. P gear is a parking gear, which is used when the engine is turned off or the car is stationary. S is the second gear, which strengthens the power and enters the sports mode.
The letters on the gear of automatic transmission cars are P, R, N, D, S and L, which represent parking gear, reverse gear, idle gear, forward gear, sports gear and low gear respectively.P parking gear Automatic transmission P stands for Park, which means parking in Chinese, so P gear is also called parking gear. When the vehicle is in P gear, it plays the role of fixing the vehicle.
N is neutral, temporarily stop and hang into this gear, stop the movement of the vehicle, and the power is not interrupted. For example, when waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. D is the forward gear (Drive), the most commonly used gear, which can be completed through throttle control when the gear needs to be raised and lowered.
r: It's a reverse gear. When it is in this gear, the reverse oil line of the hydraulic system will be turned on, so that the drive wheel will reverse and drive in reverse. N gear: it is an empty gear. When it is put into idle gear, the planetary gear system will idle and cannot output power. D: It's a forward gear.
Explanation of automatic transmission gears The gears of automatic transmission cars include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc. P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing.
1. For the illustration introduced in the automatic transmission gear, first of all, the shift lever of the automatic transmission is equivalent to the shift lever of the manual transmission. Generally, there are the following gears: P (parkating), R (reverse gear), N (idle gear), D (forward), S (or 2nd gear, that is, 2nd gear) and L (or 1st gear, that is, 1st gear). 2. When waiting for the traffic light, you should pull up the handbrake at the same time, and disable the gear when going downhill. L gear: This gear can be used when going downhill or uphill. It can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. 3. Automatic transmission carThe explanation of the gear is as follows: D gear: This is the most commonly used gear in automatic gear models. There are usually three types of DDD3, similar to the 1st and 2nd swings, 3rd and 4th gears, 5th and 6th gears of manual transmission. Different types of gears do not need to be controlled manually, and the car will move up and down according to the adjustment of the throttle. 4. The automatic transmission car gears include P gear, R gear, N gear, D gear, S gear and L gear. P is Parking. After the car stops, the P gear vehicle is to brake to prevent movement. Unlike N gear, P gear interrupts the power output. At present, some models will have independent P gear, which is called electronic braking, and the principle is the same. 5. Explanation of the gear of the automatic transmission car The gears of the automatic transmission car include P (parking gear), R (reverse gear), N (idle gear), D (forward gear), S (sports mode), etc.P gear parking gear, when the vehicle stops, the gear needs to be hung on the P gear, including turning off the engine and long-term idling stop. R gear reverse gear, you need to hang the gear on the R gear when reversing. 1. There are three types of car gears: manual gear: generally 5 forward gears + one reverse gear. In the past, cars were all 4+1. Now some high-end cars, such as Mazda 6 manual, have 6 forward gears + one reverse gear. 2. Automatic car gears include P gear (parking gear), R gear (reverse gear), N gear (idle gear), D gear (forward gear), S gear (sports mode), and there is also a reverse gear button on the handle (used with R gear). 3. Car gears include P, R, N, D, 2 (or S), L (or 1), etc.1st gear: It is the L gear of some models, and it is also a steep slope gear. It is used when the car climbs uphill or has great resistance. When using the 1st gear, the speed of the car is low. 2nd gear: It is a forward shift gear, and the wave box can be changed between 1st and 2nd gears. 4. There are six gears on ordinary automatic transmission cars, from top to bottom: P, R, N, D, S, L. 5, P-Parking, parking gear, start gear. When parking is not used, the gear is here. At this time, the wheel is in a mechanical dead state, which can prevent slipping. R-Reverse, reverse gear. It is used when reversing. N-Neutral, neutral. Use this gear when parking temporarily (such as a red light). L gear: This gear can be used when going downhill or uphill, which can limit the gear of the car to the lowest gear, so that the car can use engine power to brake when going downhill. The driver does not need to step on the brake for a long time, causing the brake pads to overheat and cause danger. However, now most cars do not have L gear, and more M gear is used. P file: The word represented by P is: Park, which means "parking, parking" in Chinese. This gear, also known as "parking gear", is the gear that is hung when parking. R gear: The word represented by R is: Reverse, which means "reverse, opposite and reverse gear" in Chinese. R gear: reverse position. Move the shift lever to that position when reversing. After the car is completely stopped, the shift lever can be moved to this position.N gear: idle position. When the gear lever is moved to this position, the gearbox does not fit into any gear. After the shift lever is moved to this position, no power is transmitted to the wheels, and the braking function of the engine cannot be used. Car gears are divided into automatic transmission gears and manual transmission gears. The gears of automatic transmission are divided into P, R, N, D, 1 or L, etc. P(Parking): It is used for parking, which uses mechanical devices to lock the turning part of the car so that the car cannot move. What do so many gears on the automatic transmission mean? First, P block. The P gear is a parking gear. There is no such gear on the manual transmission car, so special attention should be paid to the use of this gear when driving an automatic transmission car. It is often a gear used only when the vehicle reaches the destination and the driver needs to get off the car. What are the gears of the car?
Car gear introduction
Surgical instruments HS code classification
author: 2024-12-24 00:02How to interpret trade volume changes
author: 2024-12-23 23:27HS code-driven letter of credit checks
author: 2024-12-23 23:15How to build a trade data strategy
author: 2024-12-23 23:06HS code-based invoice validation
author: 2024-12-23 21:52Comparing duty rates across markets
author: 2024-12-23 23:46Long-tail trade keyword research
author: 2024-12-23 22:26How to track competitor import export data
author: 2024-12-23 22:24Cleaning agents HS code classification
author: 2024-12-23 22:14Real-time importer exporter listings
author: 2024-12-23 22:11
HS code mapping to non-tariff measures
553.32MB
Check
Sustainable supply chain analytics
858.65MB
Check
HS code-based invoice validation
991.13MB
Check
How to find ethical suppliers
343.33MB
Check
How to find HS code data for specific countries
412.95MB
Check
Pulp and paper HS code compliance
464.51MB
Check
Trade data for intellectual property checks
187.28MB
Check
Marine exports HS code insights
242.22MB
Check
Sustainable trade data analytics
669.16MB
Check
HS code-driven route selection
898.66MB
Check
HS code-based customs valuation tools
586.93MB
Check
Organic cotton HS code verification
959.22MB
Check
How to access historical shipment records
893.61MB
Check
HS code strategy for African trade lanes
168.87MB
Check
HS code integration with supply chain
179.71MB
Check
Trade data for non-profit organizations
382.49MB
Check
Solar panel imports HS code references
275.73MB
Check
HS code impact on trade finance
254.12MB
Check
International trade database customization
558.97MB
Check
USA export trends analytics
265.26MB
Check
HS code-driven compliance workflows
813.71MB
Check
Wheat (HS code ) import data
165.47MB
Check
HS code mapping tools for manufacturers
836.32MB
Check
Gourmet foods HS code classification
722.61MB
Check
Granular HS code detail for compliance officers
986.55MB
Check
Global trade certificate verification
334.91MB
Check
Comparing duty rates across markets
867.88MB
Check
How to reduce shipping delays with data
424.96MB
Check
How to use trade data for market expansion
136.68MB
Check
How to choose correct HS code in ASEAN
939.98MB
Check
Comparative supplier performance data
149.91MB
Check
Country-wise HS code compliance tips
417.62MB
Check
Integrated circuits HS code verification
129.54MB
Check
Agritech products HS code classification
941.17MB
Check
Import quota monitoring tools
544.77MB
Check
How to use trade data in negotiations
459.84MB
Check
Scan to install
Automotive supply chain HS code checks to discover more
Netizen comments More
2809 Agribusiness HS code-based analysis
2024-12-24 00:27 recommend
731 How to comply with export quotas
2024-12-24 00:00 recommend
672 Latin America trade data insights
2024-12-23 23:33 recommend
1521 HS code-based multi-country consolidation
2024-12-23 22:52 recommend
1370 Supply chain network modeling
2024-12-23 22:24 recommend