1. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove "Use Simple TextCheck the box in front of "Piece Sharing", you can right-click in the NTFS format disk, and the security options will be displayed in the property menu.
2. When the SD card or USB flash drive of the mobile phone is inserted into the computer, if the message "the file or directory is damaged and unreadable" is displayed, we first need to repair the directory of the SD card or USB flash drive of the mobile phone. Insert the USB flash drive to be repaired, open "My Computer", and find the disk symbol where the SD card or USB flash drive is located.
3. For this problem, I think we can try to fix it with the built-in tool of disk character repair on the computer, or use the relevant service code in operation to repair it.
1. The solution is: format the damaged volume or partition.After connecting the mobile device to the computer, start Windows Explorer, right-click the drive, and click "Format". Select "File System" according to actual needs and check the "Quick Formatting" option. Finally, click "Start" to format the drive.
2. First of all, this kind of failure occurs because the partition table of the hard disk is damaged. If you want to retrieve the data in the previous disk, you can use the boot disk to boot into DOS mode first, and then use Format to format the disk. In this way, the partition can generally be repaired after formatting.
3. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove the check mark in front of "Use Simple File Sharing", and you can right-click in the NTFS format disk to display security options in the properties menu.
4. Start-Run-Enter-Enter-Enter after the command prompt, enter chkdsk[disk symbol]: /f (there is a space in front of the disk symbol) Press Y-Enter the driver computer will automatically detect disk errors. Just wait - restart.
5. Some will pop up a message box in the lower right corner of the screen, prompting "A certain file has been damaged and cannot be read, please run the Chkdsk tool" and so on.
6. After that, start repairing the disk. After waiting, the problem of "the file or directory has been damaged and cannot be read, please run the chkdsk tool to repair" can be solved. Method: Click the "Start" menu, find the "Run" option in the menu, and click Open. Enter the "cmd" command in the pop-up dialog box and click the "OK" button.
1. Or after my computer, click Tools-Folder Options-View. There are two settings in it. Hide the protected system file before Uncheck it, display all the files below the selection, and then apply OK to see the hidden files.
2. Check the two options x0dx0ax0dx0a, and then it will prompt that the disk check cannot be executed. It will be automatically scanned the next time it starts up. Click "Yes".
3. The file structure of the disk system has been damaged and cannot be used. Please run the Chkdsk tool on volume C. The specific steps for running are as follows: The materials we need to prepare are: computer, first we open the operation in the start icon in the lower left corner of the computer.
4. It can be opened in the following ways: click "Start", click "Run", enter cmd and enter the command prompt window; enter the following command in this window: for example, check and repair the D partition: chkdsk D: /f Enter to start chkdsk magnet The disk inspection tool scans the D partition and checks other partitions similarly.
5. Disk repair: Open the computer, right-click on the disk that needs to be repaired, and select "Properties". Click the "Tools" tab in the pop-up properties window, and then click "Start Check" in the error check. Check "Automatically Repair File System Error" in the pop-up disk repair window, and then click "Start".
6. This is caused by you often running some software that is easy to cause damage to the structure of the volume D file system.For example, I used to use a virtual machine. In disk D, disk D itself is fat32. The virtual machine often uses ntfs to create, delete, create, delete, and your situation will occur many times later.
Trade data-driven portfolio management-APP, download it now, new users will receive a novice gift pack.
1. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove "Use Simple TextCheck the box in front of "Piece Sharing", you can right-click in the NTFS format disk, and the security options will be displayed in the property menu.
2. When the SD card or USB flash drive of the mobile phone is inserted into the computer, if the message "the file or directory is damaged and unreadable" is displayed, we first need to repair the directory of the SD card or USB flash drive of the mobile phone. Insert the USB flash drive to be repaired, open "My Computer", and find the disk symbol where the SD card or USB flash drive is located.
3. For this problem, I think we can try to fix it with the built-in tool of disk character repair on the computer, or use the relevant service code in operation to repair it.
1. The solution is: format the damaged volume or partition.After connecting the mobile device to the computer, start Windows Explorer, right-click the drive, and click "Format". Select "File System" according to actual needs and check the "Quick Formatting" option. Finally, click "Start" to format the drive.
2. First of all, this kind of failure occurs because the partition table of the hard disk is damaged. If you want to retrieve the data in the previous disk, you can use the boot disk to boot into DOS mode first, and then use Format to format the disk. In this way, the partition can generally be repaired after formatting.
3. Solution Open the "My Computer" - "Tools" - "Folder" options in turn, remove the check mark in front of "Use Simple File Sharing", and you can right-click in the NTFS format disk to display security options in the properties menu.
4. Start-Run-Enter-Enter-Enter after the command prompt, enter chkdsk[disk symbol]: /f (there is a space in front of the disk symbol) Press Y-Enter the driver computer will automatically detect disk errors. Just wait - restart.
5. Some will pop up a message box in the lower right corner of the screen, prompting "A certain file has been damaged and cannot be read, please run the Chkdsk tool" and so on.
6. After that, start repairing the disk. After waiting, the problem of "the file or directory has been damaged and cannot be read, please run the chkdsk tool to repair" can be solved. Method: Click the "Start" menu, find the "Run" option in the menu, and click Open. Enter the "cmd" command in the pop-up dialog box and click the "OK" button.
1. Or after my computer, click Tools-Folder Options-View. There are two settings in it. Hide the protected system file before Uncheck it, display all the files below the selection, and then apply OK to see the hidden files.
2. Check the two options x0dx0ax0dx0a, and then it will prompt that the disk check cannot be executed. It will be automatically scanned the next time it starts up. Click "Yes".
3. The file structure of the disk system has been damaged and cannot be used. Please run the Chkdsk tool on volume C. The specific steps for running are as follows: The materials we need to prepare are: computer, first we open the operation in the start icon in the lower left corner of the computer.
4. It can be opened in the following ways: click "Start", click "Run", enter cmd and enter the command prompt window; enter the following command in this window: for example, check and repair the D partition: chkdsk D: /f Enter to start chkdsk magnet The disk inspection tool scans the D partition and checks other partitions similarly.
5. Disk repair: Open the computer, right-click on the disk that needs to be repaired, and select "Properties". Click the "Tools" tab in the pop-up properties window, and then click "Start Check" in the error check. Check "Automatically Repair File System Error" in the pop-up disk repair window, and then click "Start".
6. This is caused by you often running some software that is easy to cause damage to the structure of the volume D file system.For example, I used to use a virtual machine. In disk D, disk D itself is fat32. The virtual machine often uses ntfs to create, delete, create, delete, and your situation will occur many times later.
Global trade scenario planning
author: 2024-12-24 00:13Frozen goods HS code classification
author: 2024-12-23 23:55How to use trade data in negotiations
author: 2024-12-23 23:33How to reduce shipping delays with data
author: 2024-12-23 22:54Real-time container throughput data
author: 2024-12-23 22:09Trade intelligence for industrial equipment
author: 2024-12-24 00:04Organic textiles HS code verification
author: 2024-12-23 23:38How to reduce lead times with trade data
author: 2024-12-23 22:15Leather goods HS code classification
author: 2024-12-23 21:53113.88MB
Check143.66MB
Check127.35MB
Check467.77MB
Check219.69MB
Check126.65MB
Check979.62MB
Check694.48MB
Check733.29MB
Check117.38MB
Check152.43MB
Check749.48MB
Check459.46MB
Check124.47MB
Check312.87MB
Check812.57MB
Check724.18MB
Check537.91MB
Check556.64MB
Check329.96MB
Check468.83MB
Check313.76MB
Check118.14MB
Check555.93MB
Check499.36MB
Check768.62MB
Check998.76MB
Check795.44MB
Check454.92MB
Check684.53MB
Check353.81MB
Check686.82MB
Check435.22MB
Check418.39MB
Check953.13MB
Check328.38MB
CheckScan to install
Trade data-driven portfolio management to discover more
Netizen comments More
1940 Global HS code data enrichment services
2024-12-23 23:44 recommend
2090 Industry consolidation via HS code data
2024-12-23 23:16 recommend
1871 HS code-based risk profiling for exporters
2024-12-23 22:22 recommend
1564 How to leverage analytics in procurement
2024-12-23 21:56 recommend
374 How to mitigate currency fluctuation risk
2024-12-23 21:53 recommend