Global sourcing risk by HS code

List of the catalogue of this article:

• 1, What does engine bump machine mean
• 2, Does the engine need to change the oil to change
• 3. What is the reason for the engine convex machine?
• 4 
  、What does convex machine mean Think
• 5
  、Global sourcing risk by HS codeWhat does the engine assembly bring more than the convex machine

startWhat does the convex machine mean?Global sourcing risk by HS code

1. [Pacific Automobile Network] The convex machine is the cylinder block and cylinder head. The engine displacement is the sum of the working volume of each cylinder of the engine, which is generally expressed in liter (L). The working volume of the cylinder refers to the gas volume swept by the piston from the upper stop point to the lower stop point, also known as the single cylinder displacement, which depends on the cylinder diameter and piston stroke.

2. The meaning of engine bulge refers to the cylinder block and cylinder head. The engine cylinder block is the structure of the cylinder containing the internal combustion engine and other parts. The cylinder head is installed on the cylinder block, sealing the cylinder from the upper part and forming a combustion chamber. It often comes into contact with high-temperature and high-pressure gas, so it bears a large heat load and mechanical load.

3. There is no national standard for convex machine, which is a technical term in the auto parts industry. It refers to the cylinder head assembly of the engine (including the oil supp and the valve chamber cover), also known as the bald machine.

4. Engine bald machine (convex machine): refers to the engine that does not include accessories and does not include the following parts: generator, starter, booster pump, intake manifold, exhaust manifold, distributor, ignition coil and other engine accessories. As the name implies, a bald machine is a bald engine.

5. It refers to the whole engine, including almost all the accessories on the engine, but it is worth noting that the convention in the disassembly industry is that the engine assembly does not include the air conditioning pump, and of course the engine assembly does not include the transmission (wave box).

Do I need to change the oil to change the engine bump machine

1. The camshaft is a gas distribution part, which is easy to dust, and the oil needs to be replaced in the process of replacement.

2. Need.The camshaft is a gas distribution part. It cannot be in direct contact with the combustion chamber, but it will be easy to enter the dust, so the oil needs to be replaced during the replacement process. Motorcycles, motorcycles, driven by gasoline engines, and two-wheeled or tricycles that control the front wheels by handwheel steering.

3. In the case of "weary driving", the engine wear is relatively large, and the requirements for oil are also relatively high. Therefore, it is recommended to shorten the interval between changing the oil in order to effectively protect the engine.

4. You can see if the oil can come up. Generally, there is no problem if the oil can come up. However, the damage of the camshaft also depends on where it is damaged. If the car is not very old, the camshaft bearing will be damaged. Generally, there is a problem with the processing of the bearing seat on the cylinder head, and the scientific name is the combined surface overcutting.

5. The oil must be changed at the same time.Change the oil filter. In order to reduce the frictional resistance between the relative moving parts in the engine and reduce the wear of the parts, the oil is continuously transported to the friction surface of each moving machine part to form a lubricating oil film for lubrication. The engine oil itself contains a certain amount of glue, impurities, moisture and additives.

6. There should be a certain gap between the camshaft and the rocker arm to form a lubricating oil film between them, so that the parts will not be worn. Depending on the engine, the gap is about 0.05-0.20 mm, generally 0.08 mm. Usually, the gap with large displacement is also larger.

What is the reason for the engine convex machine?

1. The reasons for the engine convex machine are as follows: needless to say, the engine assembly contains all auxiliary parts, including the convex machine, cylinder head and middle cylinder;Engine convex machine refers to not including all electrical appliances (generators and brackets, distributors, high-voltage lines, cremation plugs and ECUs, etc.) and oil lines (injection systems).

2. The engine bump machine is composed of cam, connecting rod, straight rod, valve, etc. The function of the cam mechanism is to control the opening and closing of the valve, so that the intake and exhaust process of the engine can proceed normally. The cam in the engine cam mechanism refers to the protruding part on the camshaft, through which the cam cooperates with the valve. , make the valve open and close at the right time.

3. The meaning of engine convex machine refers to the cylinder block and cylinder head. The engine cylinder block is the structure of the cylinder containing the internal combustion engine and other parts. The cylinder head is installed on the cylinder block, sealing the cylinder from the upper part and forming a combustion chamber. It often comes into contact with high-temperature and high-pressure gas, so it bears a large heat load and mechanical load.

4. Engine accessories such as distributors and ignition coils. As the name implies, a bald machine is a bald engine. In the industry, it has also become the two names of "engine convex machine". The engine assembly has a little fire system and the timing system.

What does convex machine mean

1. The meaning of engine convex machine refers to cylinder block and cylinder head.The engine cylinder block is the structure of the cylinder containing the internal combustion engine and other parts. The cylinder head is installed on the cylinder block, sealing the cylinder from the upper part and forming a combustion chamber. It often comes into contact with high-temperature and high-pressure gas, so it bears a large heat load and mechanical load.

2. Engine convex machine refers to excluding all electrical appliances (generators and brackets, distributors, high-voltage lines, cremation plugs and ECUs, etc.) and oil lines (injection systems).

3. There is no national standard for convex machine, which is a technical term in the auto parts industry. It refers to the cylinder head assembly of the engine (including the oil supp and the valve chamber cover), also known as the bald machine.

4. Engine bald machine (convex machine): refers to the engine that does not include accessories and does not include the following parts: generator, starter, booster pump, intake manifold, exhaust manifold, distributor, ignition coil and other engine accessories.As the name implies, a bald machine is a bald engine.

5. Check whether the grinding wheel is in contact with the steel rail). The feed of the grinding wheel of this machine should be moderate, generally 0.05~0.2mm, and should be coordinated with the running speed. When the feed is large, the running speed should be slowed down accordingly. After polishing, it should be placed in a well-ventilated place to prevent rust.

What does the engine assembly bring more than the convex machine

1. Engine accessories such as exhaust manifolds, distributors, ignition coils, etc. The replacement price is different. Engine assembly: including the whole engine and its accessories, the replacement price is more expensive than that of a simple bald machine. Engine bald machine: The engine bald machine is just a single engine, replace it, only pay for the engine, it is cheaper.

2. Hello, the engine convex machine is only the middle cylinder assembly and the cylinder head assembly, its oil sup and its valve chamber cover. The engine assembly is equipped with the engine convex machine and its generator, booster pump, intake and exhaust manifold, start motor and other accessories. It is also useless to bring you the old belt parts. You can buy new belt parts. This The new belt is not expensive either.

3. Radiator, thermoster, turbocharger, oil distributor, oil distributor, valve, etc.

4. Lubrication system and cooling system. The lubrication system can lubricate the internal parts when the engine is working, and can also transfer heat and take away part of the heat of the engine. The heat dissipation system is mainly responsible for the heat dissipation of the engine and maintaining the normal working temperature range of the engine.

5. The engine assembly includes: cylinder block, flywheel shell, transmission gear chamber, water pump, fan, transmission mechanism, timing gear, intermediate gear.Triangle belt, crankshaft, connecting rod, piston, flywheel, cylinder head, camshaft.

6. Engine assembly: refers to the whole engine, including almost all the accessories on the engine, but it is worth noting that the convention in the disassembly industry is that the engine assembly does not include the air conditioning pump, and of course the engine assembly does not include the transmission (wave box).