1. Mondeo Zhisheng is a medium-sized sedan under Ford, which adopts threeThe engines are 0-liter turbocharged engine, 0-liter naturally aspirated engine and 3-liter naturally aspirated engine respectively. The Zhisheng wheelbase of Mondeo reaches 2850mm, and the length, width and height are 4854mm, 1886mm and 1495mm respectively.
2. The new generation of Mondeo will have the world's first 5T model, as well as the 0T engine with different high and low power tuning, which has been installed on the current model.
3. The maximum power of Mondeo Zhisheng's 0-liter turbocharged engine is 175kw and the maximum torque is 340 Nm. This engine can output the maximum torque at 1900 to 3500 rpm and the maximum power at 6000 rpm. This engine is equipped with in-cylinder direct injection technology and uses aluminum alloy cylinder head and cylinder block.
4. The Mondeo 3 engine Ecoboost is a new power technology of Ford Motors, which has obtained 125 patents in the United States.
5. The GTDI engine equipped with the new Mondeo Zhisheng is an EcoboostGTDI engine that integrates the three key technologies of turbocharging, direct injection in the fuel cylinder and dual independent variable valve timing system. It is powerful and endless, so that the driver can feel its power at any time.
6. Mondeo-Zhisheng currently has 3 displacement models: 0L, 3L, 0T. Among them, 0 turbocharged models are divided into high-power versions (240 horsepower) and low-power versions (203 horsepower). There is no model with a displacement of 6L or less, but the next generation may consider introducing a 6T turbocharged version.
1. In general, the independent injection control ability of in-cylinder direct injection technology can make the engine have the most efficient fuel utilization rate under various working conditions.The increase in horsepower can be about 10%, and the fuel consumption is not much different. As consumers and manufacturers, there is really no reason to refuse this advanced technology.
2. Advantages of in-cylinder direct injection engine: layered combustion can control the nozzle, and before the piston compression stroke reaches the highest point, the spark plug begins to spray instantly; during the combustion process, the air layer isolates the heat and reduces the heat transfer to the cylinder wall, thus reducing heat loss and improving the engine's Thermal efficiency.
3. The in-cylinder direct injection technology engine can accurately control the ratio of air to fuel in each cycle. Combined with stratified combustion direct start technology, it can reduce HC emissions during cold start, and the transient response is good.
4. What are the advantages of in-cylinder direct injection engine? High efficiency: collectUsing in-cylinder direct injection technology, the fuel is directly injected into the combustion chamber, which avoids the generation of mixed gas in the intake duct, making the fuel combustion more adequate and the performance better.
5. In-cylinder direct injection, abbreviated as GDI, is the technology of directly spraying fuel into the cylinder and mixing the intake. The advantages of in-cylinder direct injection are low fuel consumption, large lifting power, and a compression ratio of up to 12. Compared with ordinary engines with the same displacement, the power and torque are increased by 10%. Then its disadvantage is that the components are complex and the price is usually expensive.
The new 5GTID was independently developed by Haver at a high cost to make up for the shortcomings of the old engine in terms of power and fuel consumption. Brand-new 5GDIT is the first engine generated by CVVL variable valve in an independent automobile enterprise. It adopts in-cylinder direct injection, inlet and exhaust dual VVT, cylinder head integrated exhaust manifold and other technologies.
Guidance: Hello, according to your description of your situation, the prescription 0.4gtid means 0.4 grams each time, 3 times a day.
.500gtid is to take medicine three times a day. According to the relevant information of the query, 0.5g is the specification of the drug, tid means taking the medicine three times a day, indicating taking the medicine three times a day.
Haval H6 is the main model under the Haval brand. On August 25, 2011, the Haval H6, which is positioned as an urban intelligent SUV, was launched in the Great Wall Automobile Tianjin New Factory, providing Mitsubishi 0L gasoline-powered models and Green Jing 0T diesel models, which are divided into three versions: urban, elite and noble. Ben.
How to leverage customs rulings data-APP, download it now, new users will receive a novice gift pack.
1. Mondeo Zhisheng is a medium-sized sedan under Ford, which adopts threeThe engines are 0-liter turbocharged engine, 0-liter naturally aspirated engine and 3-liter naturally aspirated engine respectively. The Zhisheng wheelbase of Mondeo reaches 2850mm, and the length, width and height are 4854mm, 1886mm and 1495mm respectively.
2. The new generation of Mondeo will have the world's first 5T model, as well as the 0T engine with different high and low power tuning, which has been installed on the current model.
3. The maximum power of Mondeo Zhisheng's 0-liter turbocharged engine is 175kw and the maximum torque is 340 Nm. This engine can output the maximum torque at 1900 to 3500 rpm and the maximum power at 6000 rpm. This engine is equipped with in-cylinder direct injection technology and uses aluminum alloy cylinder head and cylinder block.
4. The Mondeo 3 engine Ecoboost is a new power technology of Ford Motors, which has obtained 125 patents in the United States.
5. The GTDI engine equipped with the new Mondeo Zhisheng is an EcoboostGTDI engine that integrates the three key technologies of turbocharging, direct injection in the fuel cylinder and dual independent variable valve timing system. It is powerful and endless, so that the driver can feel its power at any time.
6. Mondeo-Zhisheng currently has 3 displacement models: 0L, 3L, 0T. Among them, 0 turbocharged models are divided into high-power versions (240 horsepower) and low-power versions (203 horsepower). There is no model with a displacement of 6L or less, but the next generation may consider introducing a 6T turbocharged version.
1. In general, the independent injection control ability of in-cylinder direct injection technology can make the engine have the most efficient fuel utilization rate under various working conditions.The increase in horsepower can be about 10%, and the fuel consumption is not much different. As consumers and manufacturers, there is really no reason to refuse this advanced technology.
2. Advantages of in-cylinder direct injection engine: layered combustion can control the nozzle, and before the piston compression stroke reaches the highest point, the spark plug begins to spray instantly; during the combustion process, the air layer isolates the heat and reduces the heat transfer to the cylinder wall, thus reducing heat loss and improving the engine's Thermal efficiency.
3. The in-cylinder direct injection technology engine can accurately control the ratio of air to fuel in each cycle. Combined with stratified combustion direct start technology, it can reduce HC emissions during cold start, and the transient response is good.
4. What are the advantages of in-cylinder direct injection engine? High efficiency: collectUsing in-cylinder direct injection technology, the fuel is directly injected into the combustion chamber, which avoids the generation of mixed gas in the intake duct, making the fuel combustion more adequate and the performance better.
5. In-cylinder direct injection, abbreviated as GDI, is the technology of directly spraying fuel into the cylinder and mixing the intake. The advantages of in-cylinder direct injection are low fuel consumption, large lifting power, and a compression ratio of up to 12. Compared with ordinary engines with the same displacement, the power and torque are increased by 10%. Then its disadvantage is that the components are complex and the price is usually expensive.
The new 5GTID was independently developed by Haver at a high cost to make up for the shortcomings of the old engine in terms of power and fuel consumption. Brand-new 5GDIT is the first engine generated by CVVL variable valve in an independent automobile enterprise. It adopts in-cylinder direct injection, inlet and exhaust dual VVT, cylinder head integrated exhaust manifold and other technologies.
Guidance: Hello, according to your description of your situation, the prescription 0.4gtid means 0.4 grams each time, 3 times a day.
.500gtid is to take medicine three times a day. According to the relevant information of the query, 0.5g is the specification of the drug, tid means taking the medicine three times a day, indicating taking the medicine three times a day.
Haval H6 is the main model under the Haval brand. On August 25, 2011, the Haval H6, which is positioned as an urban intelligent SUV, was launched in the Great Wall Automobile Tianjin New Factory, providing Mitsubishi 0L gasoline-powered models and Green Jing 0T diesel models, which are divided into three versions: urban, elite and noble. Ben.
Trade data for intellectual property checks
author: 2024-12-24 00:13HS code-based cargo insurance optimization
author: 2024-12-23 23:57Global trade pattern recognition
author: 2024-12-23 23:47How to benchmark import export performance
author: 2024-12-23 23:37HS code correlation with duty rates
author: 2024-12-23 21:58How to use analytics for HS classification
author: 2024-12-24 00:16Ready-to-eat meals HS code classification
author: 2024-12-23 23:42International trade route optimization
author: 2024-12-23 23:25Real-time cargo insurance insights
author: 2024-12-23 23:03How to use analytics for HS classification
author: 2024-12-23 22:01873.11MB
Check741.45MB
Check658.23MB
Check492.11MB
Check475.82MB
Check769.28MB
Check598.39MB
Check912.72MB
Check367.52MB
Check528.88MB
Check989.34MB
Check742.52MB
Check381.78MB
Check664.49MB
Check655.85MB
Check471.38MB
Check541.89MB
Check117.86MB
Check537.38MB
Check335.13MB
Check285.54MB
Check131.42MB
Check839.49MB
Check237.14MB
Check182.25MB
Check899.49MB
Check844.73MB
Check985.41MB
Check743.29MB
Check587.52MB
Check778.85MB
Check648.45MB
Check682.86MB
Check451.64MB
Check524.94MB
Check648.99MB
CheckScan to install
How to leverage customs rulings data to discover more
Netizen comments More
1469 Trade data-driven investment strategies
2024-12-24 00:17 recommend
2491 Steel pipes (HS code ) trade insights
2024-12-24 00:02 recommend
1084 Container freight index monitoring
2024-12-23 23:41 recommend
2263 Data-driven multimodal transport decisions
2024-12-23 22:53 recommend
2134 Global trade data
2024-12-23 22:07 recommend