When the turn signals on both sides are turned on at the same time, it plays a warning and widening role. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
The driving light, also known as the side light, is used to make the four corners of the vehicle visible, and the brightness is not as high as the headlights.This kind of lamp should be turned on on rainy days, dark days or in the underground parking lot. When the running lights are on, the sign shown in the figure will light up on the dashboard.
Frontlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
The outline light is the light installed in the four corners of the car and the top of the rear of the car, with Indicate the width and height of the front and rear of the car. The front of the light is white and the back is red. It is usually turned on at dusk, which means that it is mainly used when it is dark. I am familiar with the turn signal and turn signal.
Location light: installed in the front and rear of the car to indicate the existence and body width of the moving car. Brake light: installed at the rear, indicating that the moving car slows down or stops. Turn signal light: installed in the front, rear and side to indicate the steering of the car.
The lights of the car are as follows: headlights/headlights, turn the switch to the position in the figure.The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The position light, also known as the vehicle width indicator light, that is, the four lights in the front and rear of the car we usually see keep flashing, that is, the double flashing light, is when the vehicle encounters a problem and needs to park on the roadside. After turning on, it plays the role of warning positions for other vehicles.
Knob-type car light switch illustration Roof light switch logo illustration Roof light switch operationIt's relatively simple. When the light button in the car is in the middle position, the door will automatically light up in the car, and it can also be operated manually through the buttons on the left and right sides.
1. Rod-type light switch illustration The lever light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
2. Lighting headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal.Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
3. The headlights on the dashboard are shown in the figure. The headlight signs on it are door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil check, ABS system check, airbag check, battery prompt and fuel volume prompt.
4. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
First, there is a car on the opposite side; second, the distance between the car in the same direction in front; third, when there is enough lighting on the road; fourth, when entering a busy street. Car taillights. Its function is a signal. It is composed of rear lights, reversing lights, brake lights, rear fog lights, turn signals and reflectors.
. Headlights: Also known as headlights, it is the most important lighting device on the car. Its function is to illuminate the road and objects in front of the car when driving at night to ensure driving safety; at the same time, it can also emit high beams.The light signal alternates with the near light to dazzle the other driver when overtaking at night and avoiding the car.
Low beam, after turning on the light switch, is generally a low beam. If not, turn the light pole in front of you. The high beam, turn the light pole to the front of the car. Turn the turn signal, turn left and dial the light pole counterclockwise, and turn right and dial the light rod clockwise.
Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4.The power of the bulb is 45~60W for high beam and 25~55W for low beam.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
Illustration of the lever-type light switch The lever-type light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
CarInstrument lighting sign illustration of the use of car lights The use of driving lights: driving lights are also called width indicator lights. Its function is to make the four corners of the vehicle visible to people, and the brightness is not as high as that of the headlights. This light should be turned on on rainy days, when the sky is dark or in the underground parking lot.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The control of high beam and low beam is generally on the left lever of the steering wheel. As shown in the figure below: You can also see whether the high beam or low beam is turned on normally through the display of the dashboard.
Turn signal light: installed in the front, rear and side to indicate the steering of the car. Rear fog light: installed in the rear to improve fog, snow and other bad weather conditions, and the rear of the car can see the situation. Profile light: installed in the front and rear to mark the exterior of the car.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
The upper left corner is the logo of the low beam lamp; the lower left corner is the logo of the high beam lamp; the upper right corner is the logo of the front fog light; the lower right corner is the logo of the rear fog light. The characteristic of the near-light sign is that the line segment is tilted to the lower left.The high beam sign is characterized by a straight line segment. The feature of the front fog light sign is that the line segments are on the left, and the line segments have vertical wavy lines.
Car light sign illustration There are many styles of cars, and the arrangement position of the light switch is different for each model, but the light switch logo has a unified standard, which can be divided into lever light switch and knob light switch according to different positions. If you want to use the lights skillfully, the most important thing is to find the position of the light switch.
The light line of the low beam sign is oblique downwards, while the light line of the high beam sign is straight forward. The light of the low beam shines down, and between 12 and 18 meters in front of the car, there is a very obvious light and dark cut-off line of the beam.
The roof light switch is the simplest. Generally, it will turn on automatically. It will light up when the door is opened in the car, and it can also be operated by hand.Just operate on the left and right sides.
Trade data integration with BI tools-APP, download it now, new users will receive a novice gift pack.
When the turn signals on both sides are turned on at the same time, it plays a warning and widening role. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
The driving light, also known as the side light, is used to make the four corners of the vehicle visible, and the brightness is not as high as the headlights.This kind of lamp should be turned on on rainy days, dark days or in the underground parking lot. When the running lights are on, the sign shown in the figure will light up on the dashboard.
Frontlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
The outline light is the light installed in the four corners of the car and the top of the rear of the car, with Indicate the width and height of the front and rear of the car. The front of the light is white and the back is red. It is usually turned on at dusk, which means that it is mainly used when it is dark. I am familiar with the turn signal and turn signal.
Location light: installed in the front and rear of the car to indicate the existence and body width of the moving car. Brake light: installed at the rear, indicating that the moving car slows down or stops. Turn signal light: installed in the front, rear and side to indicate the steering of the car.
The lights of the car are as follows: headlights/headlights, turn the switch to the position in the figure.The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The position light, also known as the vehicle width indicator light, that is, the four lights in the front and rear of the car we usually see keep flashing, that is, the double flashing light, is when the vehicle encounters a problem and needs to park on the roadside. After turning on, it plays the role of warning positions for other vehicles.
Knob-type car light switch illustration Roof light switch logo illustration Roof light switch operationIt's relatively simple. When the light button in the car is in the middle position, the door will automatically light up in the car, and it can also be operated manually through the buttons on the left and right sides.
1. Rod-type light switch illustration The lever light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
2. Lighting headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal.Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.
3. The headlights on the dashboard are shown in the figure. The headlight signs on it are door prompt, handbrake prompt, seat belt prompt, engine self-check, lubricating oil check, ABS system check, airbag check, battery prompt and fuel volume prompt.
4. When the turn signals on both sides are turned on at the same time, it plays the role of warning and widening. When turning left out of the road, turning around or parking on a road without a central isolation belt, you should turn on the turn signal in advance and switch the headlights to the near beam, because if you turn on the turn signal with a high beam, the pedestrians and vehicles on the opposite side will be dazzzled by the headlights, and it is difficult to see the turn signal flashing.
First, there is a car on the opposite side; second, the distance between the car in the same direction in front; third, when there is enough lighting on the road; fourth, when entering a busy street. Car taillights. Its function is a signal. It is composed of rear lights, reversing lights, brake lights, rear fog lights, turn signals and reflectors.
. Headlights: Also known as headlights, it is the most important lighting device on the car. Its function is to illuminate the road and objects in front of the car when driving at night to ensure driving safety; at the same time, it can also emit high beams.The light signal alternates with the near light to dazzle the other driver when overtaking at night and avoiding the car.
Low beam, after turning on the light switch, is generally a low beam. If not, turn the light pole in front of you. The high beam, turn the light pole to the front of the car. Turn the turn signal, turn left and dial the light pole counterclockwise, and turn right and dial the light rod clockwise.
Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4.The power of the bulb is 45~60W for high beam and 25~55W for low beam.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
Illustration of the lever-type light switch The lever-type light switch is located on the left side of the steering wheel, which is simple and convenient to operate. As long as we turn to or dial to the designated position, the corresponding lights outside the car will turn on, and the dashboard will also light up the corresponding signs. Compared with the knob-type light switch, I believe that most car owners are more used to the lever-type light switch.
CarInstrument lighting sign illustration of the use of car lights The use of driving lights: driving lights are also called width indicator lights. Its function is to make the four corners of the vehicle visible to people, and the brightness is not as high as that of the headlights. This light should be turned on on rainy days, when the sky is dark or in the underground parking lot.
Headlights/headlights, twist the switch to the position in the picture. The low beam light, after turning on the light switch, is generally a low beam light. If not, turn the light rod in front of you. The high beam, turn the light pole to the front of the car.
The control of high beam and low beam is generally on the left lever of the steering wheel. As shown in the figure below: You can also see whether the high beam or low beam is turned on normally through the display of the dashboard.
Turn signal light: installed in the front, rear and side to indicate the steering of the car. Rear fog light: installed in the rear to improve fog, snow and other bad weather conditions, and the rear of the car can see the situation. Profile light: installed in the front and rear to mark the exterior of the car.
Frontlight sign: The headlight sign of the vehicle in front is divided into high beam and low beam. When the driver needs to drive at night or on a foggy day, he should use a lom beam to avoid direct sunlight on the eyes of the vehicle in front of him, resulting in blurred vision. When driving on the highway, high beams should be used to increase the range of vision and enhance forward alertness.
The upper left corner is the logo of the low beam lamp; the lower left corner is the logo of the high beam lamp; the upper right corner is the logo of the front fog light; the lower right corner is the logo of the rear fog light. The characteristic of the near-light sign is that the line segment is tilted to the lower left.The high beam sign is characterized by a straight line segment. The feature of the front fog light sign is that the line segments are on the left, and the line segments have vertical wavy lines.
Car light sign illustration There are many styles of cars, and the arrangement position of the light switch is different for each model, but the light switch logo has a unified standard, which can be divided into lever light switch and knob light switch according to different positions. If you want to use the lights skillfully, the most important thing is to find the position of the light switch.
The light line of the low beam sign is oblique downwards, while the light line of the high beam sign is straight forward. The light of the low beam shines down, and between 12 and 18 meters in front of the car, there is a very obvious light and dark cut-off line of the beam.
The roof light switch is the simplest. Generally, it will turn on automatically. It will light up when the door is opened in the car, and it can also be operated by hand.Just operate on the left and right sides.
How to find reliable global suppliers
author: 2024-12-24 00:11Russia HS code-based trade compliance
author: 2024-12-24 00:05HS code-driven trade finance optimization
author: 2024-12-23 23:44Shipping lane performance metrics
author: 2024-12-23 22:44HS code mapping in government tenders
author: 2024-12-23 22:26Global trade supply chain modeling
author: 2024-12-24 00:34Identify duty-free items via HS code
author: 2024-12-24 00:28Dairy sector HS code forecasting
author: 2024-12-24 00:24HS code-driven tariff reduction strategies
author: 2024-12-23 23:25Semiconductor HS code verification
author: 2024-12-23 22:09
Africa import data trends
376.35MB
Check
Gourmet foods HS code classification
673.95MB
Check
Global sourcing directories by HS code
344.55MB
Check
Gemstones HS code references
982.52MB
Check
Renewable energy equipment HS code mapping
569.86MB
Check
Global trade barrier analysis
668.39MB
Check
Global trade contract verification
475.73MB
Check
Advanced customs data integration
513.25MB
Check
How to identify correct HS codes
583.44MB
Check
In-depth customs data analysis tools
178.77MB
Check
Precious metals HS code alignment
252.78MB
Check
Trade data visualization dashboards
387.58MB
Check
Predictive analytics for trade flows
143.53MB
Check
HS code-based risk profiling for exporters
131.61MB
Check
HS code-based quota management
928.88MB
Check
HS code categorization for finished goods
374.64MB
Check
How to map trade data to SKUs
759.42MB
Check
HS code integration in digital customs systems
667.94MB
Check
shipment tracking services
875.77MB
Check
HS code-based supplier development
538.75MB
Check
Pharma cold chain HS code analysis
519.77MB
Check
Medical consumables HS code data
572.76MB
Check
Pharmaceutical compliance monitoring
933.53MB
Check
HS code-based invoice validation
611.11MB
Check
Semiconductor HS code verification
133.76MB
Check
Trade data for transshipment analysis
126.34MB
Check
Real-time trade document filing
212.88MB
Check
HS code-facilitated PL selection
159.66MB
Check
Import quota monitoring tools
583.83MB
Check
HS code-based supplier development
789.62MB
Check
How to analyze customs transaction records
276.33MB
Check
Trade data solutions for wholesalers
489.26MB
Check
Country-specific HS code duty reclaims
372.43MB
Check
Global trade pattern recognition
213.78MB
Check
Trade data-driven investment strategies
244.57MB
Check
How to understand re-export regulations
518.15MB
Check
Scan to install
Trade data integration with BI tools to discover more
Netizen comments More
2537 Canned foods HS code classification
2024-12-24 00:13 recommend
549 Global trade news aggregation
2024-12-23 23:23 recommend
1924 Trade data-driven warehousing decisions
2024-12-23 23:19 recommend
2202 Trade data integration with CRM
2024-12-23 22:05 recommend
436 shipment data access
2024-12-23 21:58 recommend