Pre-export HS code verification steps

List of the directory of this article:

• 1,What player to use for UDF file
• 2 、How to change mobile optical drive udf
• 3,Pre-export HS code verification steps What is the difference between burning UDF and UDF/ISO?
• 4, How to change the USB disk file system to UDF?
• 5, How to restore the disc to udf format
• 6, Common CD-ROM File System Standard Summary

What player to use for UDF file

Use kmplayer (, right-click → open → open video CD (if it still doesn't work, right-click → open → open DVD) Finally, there is still no Method playback can be played by right-clicking → capturing → saving as.

You should be able to open your CD. If your friend uses burning software to burn this file to a CD-ROM, then the file system should be CDFS, so that you can open it on the computer. The problem is that his computer supports the UDF system, while yours can't. So you have to download the relevant software to use this CD-ROM.

If it is a pure and most primitive CD player, it really can't be broadcast.The previous VCD, and many portable CD players, compatible with MP3 can be played, and DVDs can also be played.

This is caused by different playback formats. You can search on the Internet and download a video format converter for your own conversion, or download a BUP format player.

Reply to the post UDF02 file system is used to encapsulate DVD content, and BD content should of course be encapsulated with UDF5 or above file system. If the package is wrong, it will definitely not be recognized.

How to change mobile optical drive udf

1. Use CD repair tools: Some disc repair tools can To fix CD-ROM problems in UDF format, such as CDCheck, IsoBuster, RoadkilsUnstoppableCopier, etc., these tools can check the errors or damaged parts in the disc, restore the disc, and make the disc work normally again.

2. Which version of the system of WINDOWS do you engrave? DVD (UDF) burns WIN1 IOS image files, which can successfully start the installation system from the optical drive.

3. The mobile hard disk symbol cannot be modified. Mobile Hard disk Introduction: Mobile Hard disk is a storage product that uses hard disk as the storage medium to exchange large-capacity data between computers and emphasizes portability.

4. Windows 7 cannot format the disc into UNF format because the disk autoplay service of Windows 7 is turned off! The method is as follows: run services.msc, open the service, select Shell Hardware Detection, change the item to "Automatic", and start it.

What is the difference between burning UDF and UDF/ISO?

Just burn it as iso, boot is a bootable disc, iso is an international standard disc format (supported by devices that can read DVDs all over the world), and udf is a unified disc format (Universal Disc Format, a device that can read DVDs around the world Most of them are supported).

UDF is a CD file format. The file written by CDRW is in this format. ISO is a universal CD-ROM file system. Any type of computer supports it, and all burning software also supports it.

In this way, it undoubtedly greatly increases the convenience of operation. And when using UDF, you can generally use the Explorer in Windows to burn, and it will not be likeWhen burning with ISO image files, the operation of closing the section (Close Session) must be performed after each completion, which reduces the chance of burning failure.

The difference between these options. The first one: to engrave mirror files, any type is find, and it is generally used for engraving data. The second: Only play music, which can be played with a CD player. Third: In addition to music, other data can be put, including text, pictures, etc. The sixth: literal meaning.

The difference between bootable CD and bootable UDF is that the size and capacity of the single file burned are different. The burned CD can be started. "Bootable CD" is in ISO9660 format, and "Bootable UDF" is in udf format.

How to change the USB disk file system to UDF?

Keep pressing the del key to enter the bios interface during the restart of the computer. After entering the bios interface, select Macro "Advanced Mode" at the bottom of the page, and then select "Boot" at the top of the page. Select the "UEFI/LegacyBoot" option and set "BootDeviceControl" to "uefionly".

Windows system formatting disk The first step is to double-click [My Computer] and select the disk that needs to be formatted, as shown in the red box. ( Use the win7 system for demonstration operation here). Figure 1: Select the disk we need to format. Step two, we right-click the disk and select [Format].

Connect the USB flash drive to the computer. Right-click the USB flash drive and select the formatting option. Note: After formatting, the files in the USB flash drive will disappear. Please back up the files in the USB flash drive before formatting. Change the file system option to NTFS and click Start. The change is successful. Right-click on the USB flash drive to view the properties. The format is NTFS.

Step 5, click the input box below the volume label and enter the name of the USB flash drive, then check the checkbox on the left of Quick Formatting, and then click the start option at the bottom of the window. Step 6, after formatting, right-click the USB flash drive (H), and then we can see that the file system has been successfully converted to the required format.

How to convert "FAT32" format to "NTFS" format: Open My Computer, right-click the USB flash drive you want to format, and select "Properties" in the opening list.Click the hardware at the top of the USB disk properties page. In the hardware tab, double-click the USB disk that needs to be converted.

Preparation materials: include a genuine blank USB flash drive of 4 or more than 8G (if there is data on it, back it up to the hard disk or cloud disk first), install the UltraISO software, and download the startup ISO file containing the system file on the Internet. Run UltraISO, click "File" - "Open" in the menu bar, and select the downloaded ISO file.

How to restore the disc to udf format

First, click the disc in the keyboard to start running, and enter cmd to open the command prompt line. Next, enter the command convertf/fsntfs Enter.Finally, it can be changed to dvd after returning to the car.

Changes to the mobile optical drive UDF file system can be made through the following steps: connect the mobile optical drive and open the "My Computer" or "Computer" window. Right-click the moving optical drive icon and select "Properties".

First, gently wipe the surface of the disc with a clean and soft cloth or disc cleaning cloth. Make sure there is no dust, fingerprints or scratches. This will help the disc to read and format. Secondly, insert the UDF CD into other devices. Try to format the CD on other devices and use a compatible file system.

If there are original files in the disc, it is caused by the format that can no longer be added to the burning content. It is recommended to replace the new CD-ROM.

dvd-r cannot be erased and then burned after burning, one-time.The described operation can only be realized by using DVD-RW, which can be erased and burned again.

If it is a UDF format video in the disc, open it in the form of a virtual optical drive. You can download the virtual optical drive on Baidu. UDF format videos of some discs can be copied and copied by right-clicking. It is recommended to try Storm Video, an all-purpose format video player first.

Common CD-ROM File System Standard Summary

The most common boot CD-ROM is a PE boot disk based on WindowsPE, which supports FAT32 and NTFS file systems. FAT32 is an older file system that can be recognized by most computers, but does not support a single file with more than 4GB of storage.

ISO-9660: abbreviated as ISO, was formulated by the International Organization for Standardization in 1985. At present, it is the only universal CD-ROM file system that supports any type of computer and all burning software.

ext2 access files have excellent performance and can support 256-byte long file names. It is the standard file system in the GNU/Linux system. Ext3 file system. Ext3 is the log version of the ext2 file system, which adds the log function to the ext2 file system.