Germany export data by HS code

List of contents of this article:

• 1,Germany export data by HS code How about the quality of the concept s1 car
• 2、6, How about Honda Concept s1

How is the quality of the concept s1 car

The vehicle's pointing is accurate and easy to control. Therefore, the concept of s1 car is of good quality.

Not good. The quality of the concept s1 car is not good. The disadvantages of the concept s1 car are too loud noise, poor tires, too thin body, too thin paint, etc.

Personally, I think the advantage of the Honda concept S1 automatic gear 13 model is that the fuel economy and quality reliability of the car are good. The disadvantage is that the car has a small number of holdings, and the convenience of maintenance is not very advantageous.

The engine used in concept s1 is Honda. Honda's engine is very reliable and durable, and the fuel economy is also very good. Concept s1 is a cost-effective car. If you are interested in this car, you can test drive it.

Honda Concept s1 is a good car, which is worth buying. In 2013, GAC Honda launched 5 concept s1, adopting a new appearance design, and has also been improved in configuration. The power follows the 15L VTEC engine, power 77kW, torque 136Nm , in terms of transmission, it continues to match the 5-speed manual or 5-speed automatic transmission.

How many exhaust valves of Honda Concept S1 engine

1. There is an exhaust valve. There is an exhaust valve in the cover of the Junyue valve room. The function of the exhaust gas valve is mainly to control the exhaust gas involved in the combustion, which is not only conducive to environmental protection, reducing the emission of nitrogen oxides, but also to ensure sufficient power for the engine.

2. There are two.The exhaust valve, also known as the oil-gas separator and pressure control valve, is installed between the compressor outlet and the condenser inlet. Through separation, the heat transfer effect in the condenser and evaporator is improved. It has two exhaust gas valves.

3. Aging, the exhaust valve works when the engine is at high temperature. After a long time, it will age like the valve chamber cover pad and rubber ring.

4. The four spark plugs in front of the concept s1 are located in the combustion chamber of the engine. According to the query of Know Chedi.com, the four spark plugs in front of concept s1 help to improve combustion efficiency and reduce emissions. It is located in the combustion chamber of the engine.

5. There is an exhaust valve in the cover of the Junyue valve room. The function of the exhaust gas valve is mainly to control the exhaust gas involved in the combustion, which is not only conducive to environmental protection and reducing the emission of nitrogen oxides, but also to ensure sufficient power for the engine.

6. For example, when the negative pressure value of the exhaust valve of our engine is only 60% of the standard value, the engine oil consumption may reach 2,500 kilometers per liter of oil consumption. When the value is below 65%, it will consume one liter of oil within 2,000 kilometers.

benHow about Tian GAC's concept s1

1. Honda's concept S1 is not bad, with few failures, low fuel consumption, low maintenance cost, and good after-sales service attitude.

2. S1 is an economical and practical family car. Relying on Guangben's excellent technology and platform, as well as a perfect service network, it will make your car very pleasant. If you use it in the city, it is recommended to buy 3 automatic transmissions, and the price of 77,000 yuan is very cost-effective.

3. OK. According to the query, the official website of Chedi is displayed. In terms of power, the concept S1 is equipped with a 5L naturally aspirated engine, with a maximum power of 113 horsepower and a maximum torque of 145 Nm, matched with a 5-speed manual or CVT automatic transmission. This set of power systems is mature and stable, with good performance and fuel economy.

What engine is used by concept s1

There are two power options for concept S1, namely 13L iDSI and 15L VTEC engines, both of which are directly from Honda, domestic assembly, non- Imported.

The concept s1 uses Honda's engine, and the concept s1 is a small hatchback with two types of engines, one is a 3-liter naturally aspirated engine and the other is a 5-liter naturally aspirated engine. The s wheelbase is 2450mm, and the length, width and height are 4460mm, 1690mm and 1495mm respectively.

Concept s1 adopts a total of two types of engines, one is a 3-liter naturally aspirated engine, and the other is a 5-liter naturally aspirated engine.Concept s1 is a car brand promoted by GAC Honda. GAC Honda's independent brand concept, which has been worked hard for several years, has finally entered the launch of its first car concept S1.

Concept s1 uses Honda's engine, and Concept s1 is a small sedan. This car uses two engines, one is a 3-liter naturally aspirated engine and the other is a 5-liter naturally aspirated engine. The wheelbase of concept s1 is 2450mm, and the length, width and height are 4460mm, 1690mm and 1495mm respectively.

The concept s1 adopts a total of two engines, one is a 3-liter naturally aspirated engine and the other is a 5-liter naturally aspirated engine. Concept s1 is a car brand promoted by GAC Honda. GAC Honda's independent brand concept, which has been worked hard for several years, has finally entered the launch of its first car concept S1.

Is the concept s1 a Honda engine

1, the concept s1 uses Honda's engine, the concept s1 is a small hatchback with two types of engines, one is a 3-liter naturally aspirated engine, and the other is a 5-liter natural Intake engine. The s wheelbase is 2450mm, and the length, width and height are 4460mm, 1690mm and 1495mm respectively.

2. Concepts1 uses Honda's engine. Concepts1 is a small car with two engines, one is a 3-liter naturally aspirated engine and the other is a 5-liter naturally aspirated engine. The wheelbase of concepts1 is 2450mm, and the length, width and height are 4460mm, 1690mm and 1495mm respectively.

3. The engine of Concept s1 is Honda, and Concept s1 is a small sedan. The wheelbase of this car is 2450mm, and the length, width and height are 4460mm, 1690mm and 1495mm respectively. The concept s1 uses a 3-liter naturally aspirated four-cylinder engine.

4. The concept S1 has two power options, namely 13L iDSI and 15L VTEC engines, both of which are directly from Honda, assembled in China, and not imported.

5. The engine used in concept s1 is Honda's. Honda's engine reliability and durability are very good, and the fuel economy is also very good. Concept s1 is a cost-effective car. If you are interested in this car, you can test drive it.

6. The concept s1 is solid. Its quality, engine and gearbox are all better than antelope. The concept s1 is a car brand launched by GAC Honda that has worked hard for three years. Finally, it has ushered in the launch of its first car concept S1. In the past four years, every GAC Honda will bring an important auto show.

How about Honda Concept s1

1. The biggest feature of Concept S1 is to follow the platform and technology of the old Sidi, and rely on the rich resource support of GAC Honda Group to achieve rapid research and development of models. As a new model, the "new" of the concept S1 is more reflected in the brand value than the comprehensive innovation of the model.

2 、Honda GAC Concept S1 has excellent performance in terms of power performance, comfort, safety, space layout and other aspects. It can be said that it is a car with both the comfort of a sedan and the comprehensive performance of an SUV.

3. Honda concept S1: atmospheric appearance, spacious space, rich storage space, large trunk space, smooth gear shifting, flexible turning, and good fuel economy. The power is not bad, which can meet daily use, but the acceleration effect is average, and it lacks driving fun.

4. As an economical car positioned in the low-end small car market, the concept S1 will of course take practicality as the starting point in interior design and configuration, and it will not be equipped with too many non-practical chicken rib configurations. The configuration level of the concept S1 should be comparable to that of the old Sidi.

5. Most of the technology is learned from Japan.The engine technology of concept S1 3 is double spark plug ignition technology, and 5 is VTEC technology.

6. The reason why so few people buy the concept s1: the imitation traces are too obvious, the interior workmanship is rough, the plastic feeling is strong, the tail box space cannot be expanded, the acceleration effect is average, the driving pleasure is lacking, the price is high, the sheet metal is thin, and the high-speed noise is loud.