1, · The basic composition of the fingerprint access control system scheme (1) Management center: A PC connected to the access control controller or network is connected to other access controllers or PCs through the LAN or WAN to realize the processing and analysis of the information collected by the access control controller, and send control instructions and manage the corresponding software.
2. Fingerprint access control replaces the traditional key with fingers. When using, you only need to put your finger flat on the acquisition window of the fingerprint collector to complete the unlocking task. The operation is very simple and avoids other access control systems (traditional mechanical locks, password locks, identification cards, etc.) that may be forged, stolen and forgotten. , deciphering and other disadvantages.
3. Put your finger on the fingerprint reader. The system will automatically recognize fingerprints and compare them with the fingerprints stored in the system. If the recognition is successful, the system will sound a prompt and turn on the access control.If the recognition fails, the system will sound an alarm and refuse to enter.
The functional characteristics of the fingerprint access control system The fingerprint access control system adopts an efficient fingerprint recognition module, so that fingerprints can It is very convenient to open the lock directly, and the security is also very high. The fingerprint access control system also uses the Linux operating system and ARM processor, so its access control system can be well protected.
The hardware of the fingerprint access control system is mainly composed of microprocessor, fingerprint recognition module, liquid crystal display module, keyboard, real-time clock/calendar chip, electronic control lock and power supply, etc. As the upper computer of the system, the microprocessor controls the whole system.The fingerprint recognition module mainly completes the functions of collection, comparison, storage, deletion and other functions of fingerprint features.
Lock body and shell part: composed of mechanical lock body and emergency lock cylinder, handle, etc. Fingerprint lock principle: Fingerprint features are unique and permanent, so we can match a person's fingerprints with his fingerprints. By comparing his fingerprint features and pre-saved fingerprint features, we can verify his true identity.
The access control system adopts a split structure, which is composed of a controller, a card reader, a writer, an electric lock, a smart card, a power supply, etc. The Writer Writes Various Logos, Codes, Data, Etc. To Various Identification Cards. The controller is the core of the access control system, which consists of a microprocessor and a corresponding peripheral circuit.
The access control system is an indispensable part of the intelligent building security automation system, and it is also one of the necessary systems for all intelligent buildings.According to the latest intelligent building design standards, access control system, anti-theft alarm system, closed-circuit television monitoring system and electronic patrol system together constitute the main part of the intelligent building security system.
The identification unit is an important part of the access control system. It plays a role in identifying and confirming the identity of passers-by. There are many ways and types of identification, mainly including card identification methods, password identification methods, biometric identification methods and composite Class identification method.
The intelligent access control management system is connected to the fire alarm linkage. When a fire occurs, the alarm number will be turned on and a signal will be sent to the community management center, and the management center can deal with it accordingly. .
The system is equipped with scientific management software, which can realize the scientific management of the access control system. The application of TCP/IP Ethernet module can facilitate network control and remote control.
Real-time clock, operation prompts and other information, together with the keyboard to form a human-computer interface. Access control can be divided into induction ID/IC card access control, biometric access control [such as fingerprint recognition access control, face (face) recognition access control, palm pattern (palm) recognition access control and iris recognition access control, etc.], magnetic card recognition access control and password recognition access control according to the identification method.
The installation method of the face recognition access control system is as follows: wiring: When you buy the face recognition access control equipment sold by the manufacturer, the first thing to do is to wire it so that the device can control the switch door.
1. The face recognition access control system scheme can be selected from Jieyi Technology. Jieyi Technology's faceless attendance access control system adopts AI face recognition technology to manage internal personnel and visitors. , improve the security and convenience of the office space.
2. For the face recognition access control system scheme, you can consult the Jieyiwulian brand. The accuracy of face recognition is greatly affected by the installation position of the front-end equipment, on-site lighting (such as too dark or too bright) and other factors. In order to ensure the acquisition effect of the face capture unit, there are strict requirements for the installation environment and the installation location of the face capture unit.
3. The choice of face access control should be selected according to the indoor and outdoor installation, roomChoose the strong light face recognition access control machine outside. The strong outdoor light, the strong light face access control can be recognized in the sun. High pass rate. 2 The scope of face recognition access control for indoor selection is relatively wide, and it can generally be satisfied.
4. Face recognition has the characteristics of natural, non-contact, unique and difficult to copy, which is more suitable for daily scene applications on construction sites.
1. Install a smart password lock First, you need to install the smart password lock on the door. Before installation, you need to determine the position of the lock, and then use screws to fix the lock on the door. After the installation is completed, you need to connect the power supply and then initialize the settings.
2. Intelligent access control managementThe system is connected to the fire alarm linkage. When a fire occurs, the alarm will be turned on and a signal will be sent to the community management center. The management center can deal with it accordingly.
3. Generally, a community of about 20 years old is an old community. The traditional access control system must be pre-wired. If it is transformed, the project may be larger. However, it is recommended that you consider the intelligent access control system. You only need access control controllers, card readers, cameras, routers and other equipment to complete the network.
4. The intelligent elevator access control system is a high-tech product that adapts to the needs of this era. This can not only effectively solve the chaos of elevators in high-rise buildings, but also promote the formal construction and management of high-rise buildings, and also reduce the owner's worries about anti-theft as much as possible.
5, often in some places, the network cannot be networked by wire, so it is necessary to consider using wireless means to realize the networking of the access control system. The UART serial wireless access module (TLG10UA03) developed and produced by our company has been successfully applied to the wireless access control system.
Tariff reduction opportunity analysis-APP, download it now, new users will receive a novice gift pack.
1, · The basic composition of the fingerprint access control system scheme (1) Management center: A PC connected to the access control controller or network is connected to other access controllers or PCs through the LAN or WAN to realize the processing and analysis of the information collected by the access control controller, and send control instructions and manage the corresponding software.
2. Fingerprint access control replaces the traditional key with fingers. When using, you only need to put your finger flat on the acquisition window of the fingerprint collector to complete the unlocking task. The operation is very simple and avoids other access control systems (traditional mechanical locks, password locks, identification cards, etc.) that may be forged, stolen and forgotten. , deciphering and other disadvantages.
3. Put your finger on the fingerprint reader. The system will automatically recognize fingerprints and compare them with the fingerprints stored in the system. If the recognition is successful, the system will sound a prompt and turn on the access control.If the recognition fails, the system will sound an alarm and refuse to enter.
The functional characteristics of the fingerprint access control system The fingerprint access control system adopts an efficient fingerprint recognition module, so that fingerprints can It is very convenient to open the lock directly, and the security is also very high. The fingerprint access control system also uses the Linux operating system and ARM processor, so its access control system can be well protected.
The hardware of the fingerprint access control system is mainly composed of microprocessor, fingerprint recognition module, liquid crystal display module, keyboard, real-time clock/calendar chip, electronic control lock and power supply, etc. As the upper computer of the system, the microprocessor controls the whole system.The fingerprint recognition module mainly completes the functions of collection, comparison, storage, deletion and other functions of fingerprint features.
Lock body and shell part: composed of mechanical lock body and emergency lock cylinder, handle, etc. Fingerprint lock principle: Fingerprint features are unique and permanent, so we can match a person's fingerprints with his fingerprints. By comparing his fingerprint features and pre-saved fingerprint features, we can verify his true identity.
The access control system adopts a split structure, which is composed of a controller, a card reader, a writer, an electric lock, a smart card, a power supply, etc. The Writer Writes Various Logos, Codes, Data, Etc. To Various Identification Cards. The controller is the core of the access control system, which consists of a microprocessor and a corresponding peripheral circuit.
The access control system is an indispensable part of the intelligent building security automation system, and it is also one of the necessary systems for all intelligent buildings.According to the latest intelligent building design standards, access control system, anti-theft alarm system, closed-circuit television monitoring system and electronic patrol system together constitute the main part of the intelligent building security system.
The identification unit is an important part of the access control system. It plays a role in identifying and confirming the identity of passers-by. There are many ways and types of identification, mainly including card identification methods, password identification methods, biometric identification methods and composite Class identification method.
The intelligent access control management system is connected to the fire alarm linkage. When a fire occurs, the alarm number will be turned on and a signal will be sent to the community management center, and the management center can deal with it accordingly. .
The system is equipped with scientific management software, which can realize the scientific management of the access control system. The application of TCP/IP Ethernet module can facilitate network control and remote control.
Real-time clock, operation prompts and other information, together with the keyboard to form a human-computer interface. Access control can be divided into induction ID/IC card access control, biometric access control [such as fingerprint recognition access control, face (face) recognition access control, palm pattern (palm) recognition access control and iris recognition access control, etc.], magnetic card recognition access control and password recognition access control according to the identification method.
The installation method of the face recognition access control system is as follows: wiring: When you buy the face recognition access control equipment sold by the manufacturer, the first thing to do is to wire it so that the device can control the switch door.
1. The face recognition access control system scheme can be selected from Jieyi Technology. Jieyi Technology's faceless attendance access control system adopts AI face recognition technology to manage internal personnel and visitors. , improve the security and convenience of the office space.
2. For the face recognition access control system scheme, you can consult the Jieyiwulian brand. The accuracy of face recognition is greatly affected by the installation position of the front-end equipment, on-site lighting (such as too dark or too bright) and other factors. In order to ensure the acquisition effect of the face capture unit, there are strict requirements for the installation environment and the installation location of the face capture unit.
3. The choice of face access control should be selected according to the indoor and outdoor installation, roomChoose the strong light face recognition access control machine outside. The strong outdoor light, the strong light face access control can be recognized in the sun. High pass rate. 2 The scope of face recognition access control for indoor selection is relatively wide, and it can generally be satisfied.
4. Face recognition has the characteristics of natural, non-contact, unique and difficult to copy, which is more suitable for daily scene applications on construction sites.
1. Install a smart password lock First, you need to install the smart password lock on the door. Before installation, you need to determine the position of the lock, and then use screws to fix the lock on the door. After the installation is completed, you need to connect the power supply and then initialize the settings.
2. Intelligent access control managementThe system is connected to the fire alarm linkage. When a fire occurs, the alarm will be turned on and a signal will be sent to the community management center. The management center can deal with it accordingly.
3. Generally, a community of about 20 years old is an old community. The traditional access control system must be pre-wired. If it is transformed, the project may be larger. However, it is recommended that you consider the intelligent access control system. You only need access control controllers, card readers, cameras, routers and other equipment to complete the network.
4. The intelligent elevator access control system is a high-tech product that adapts to the needs of this era. This can not only effectively solve the chaos of elevators in high-rise buildings, but also promote the formal construction and management of high-rise buildings, and also reduce the owner's worries about anti-theft as much as possible.
5, often in some places, the network cannot be networked by wire, so it is necessary to consider using wireless means to realize the networking of the access control system. The UART serial wireless access module (TLG10UA03) developed and produced by our company has been successfully applied to the wireless access control system.
Aluminum products HS code insights
author: 2024-12-23 23:41Semiconductor HS code verification
author: 2024-12-23 22:41Germany international trade insights
author: 2024-12-23 21:24How to optimize shipping schedules
author: 2024-12-23 23:43HS code-based multi-country consolidation
author: 2024-12-23 23:16Marble and granite HS code references
author: 2024-12-23 22:30Global supply chain partner networks
author: 2024-12-23 21:31Global trade data-driven forecasting
author: 2024-12-23 21:16175.36MB
Check856.62MB
Check624.23MB
Check658.43MB
Check564.68MB
Check892.73MB
Check113.29MB
Check627.81MB
Check612.28MB
Check112.22MB
Check519.63MB
Check664.43MB
Check668.66MB
Check324.29MB
Check338.84MB
Check517.23MB
Check627.85MB
Check298.21MB
Check568.86MB
Check337.79MB
Check482.44MB
Check683.98MB
Check675.94MB
Check856.28MB
Check473.68MB
Check633.15MB
Check182.38MB
Check285.89MB
Check751.62MB
Check626.66MB
Check712.17MB
Check786.94MB
Check586.35MB
Check946.96MB
Check428.57MB
Check426.44MB
CheckScan to install
Tariff reduction opportunity analysis to discover more
Netizen comments More
1637 Comprehensive customs data libraries
2024-12-23 23:40 recommend
1286 How to build a resilient supply chain
2024-12-23 23:26 recommend
993 Automated customs declaration checks
2024-12-23 22:56 recommend
92 import export database
2024-12-23 22:32 recommend
97 international trade insights
2024-12-23 21:13 recommend