HS code-based insurance evaluations

List of catalogs of this article:

• 1, What to do if the engine temperature of Zhongtai Automobile z100 is too high
• 2, How to disassemble the engine 3G10K timing chain cover of Zhongtai Z100?
• 3、How about the quality of Zhongtai z100

What to do if the engine temperature of Zhongtai z100 is too high

First of all, the water temperature is 100 degrees and the fan rotation is too high, need It is necessary to add enough cooling water and check whether the thermost is normal. The thermost cannot open the door in time according to the regulations, and the new product must be replaced in time.Finally, park in the shade and wait for the temperature of the car to drop.

If the engine overheats on ordinary highways, you should slow down as soon as possible, drive the car into the shade of the tree, or drive to a relatively cool place, and stop the car. Open the engine cover, let the engine idle, and wait for the engine temperature to gradually return to normal. After the engine water temperature returns to normal, turn off the engine.

You can choose to go to the repair station for repair. On the way, the water temperature is too high. During the driving process, it is found that the water temperature is too high and must not be flushed with cold water, so that the cylinder may break; you can't rush to open the lid of the water tank to avoid boiling hot water from injuring people. Turn off the ignition and wait for about 20 minutes before opening the lid of the water tank and adding cold water for emergency.

Insufficient coolant, coolant leakageThe lack of dew or coolant will cause the water temperature of the engine to rise. At this time, we should check the coolant. If it is insufficient, add it to the appropriate position first, and then check whether the liquid level has dropped seriously in a few days. If so, we need to find the leakage location.

When the temperature of the engine is too high, you can touch the temperature of the water supply pipe and underwater pipe with your hand to judge the location of the fault. If the temperature difference between the two water pipes is large, it can be judged that the thermostat is not working. If spare parts cannot be purchased on the way, the thermoster can be taken out for emergency use and replaced immediately after returning to the equipment.

The solution to the excessive temperature of the car engine: find a safe place to park on the side, let the vehicle idle, and do not turn off the engine.

How to disassemble the engine 3G10K timing chain cover of Zhongtai Z100?

In order to make the "ignition timing" energy effectively utilized or maximized, a certain "amount" is generally required in advance, so when the piston is about to run at the "moment" of the "upper stop point" to "ignition" and burn to work.

The replacement steps of the engine chain are as follows: remove the valve chamber cover, remove the crankshaft pulley, remove the housing of the timing chain; rotate the crankshaft, rotate the crankshaft to the stop point on the cylinder, tighten the crankshaft fixing screw, and fix the crankshaft. The crank timing sprocket does not have a sliding key, and it rotates at will in 360; rotates the intake and exhaust camshaft.

Disassemble the valve chamber cover, remove the crankshaft pulley, and remove the timing chain shell; rotate the crankshaft, turn the crankshaft to the upper stop point of a cylinder, and squeel the crankshaft fixing thread to fix the crankshaft.

Disassembly of exhaust manifold heat insulation cover exhaust manifold exhaust manifold gasket manifold bracket intake manifold gasket intake pipe generator engine wire harness valve chamber cover and timing chain cover: first remove the valve chamber cover and washer, and then remove the timing chain or timing belt cover.

The replacement of the timing chain does not require the removal of the engine. The main function of the engine chain is to drive the gas distribution mechanism of the engine, so that the intake and exhaust of the engine can be turned on or turned off at the appropriate time to ensure the normal intake and exhaust of the engine cylinder.

Zhongtai z100 engine has a fluttering sound

As for the others, it may be the internal question of the engine Questions, such as EGR valve blockage, etc. 3. The engine has a hissing sound, just like steam or air coming out of the engine. Generally, after hearing this sound, the engine will quickly lose power. There may be a problem. The engine is overheated. Check the cooling system.

The main reason is that some parts are worn or even improperly assembled, resulting in improper adjustment. Some abnormal noises are predictable, and the engine is likely to be accidentally damaged. Therefore, when there is an abnormal noise in the engine, it should be repaired in time to prevent the failure from expanding.

Sudden acceleration will also cause a tempering explosion. The possible reason for the abnormal noise of the Zhongtai z300 engine is that the power steering oil is missing and the oil is added; the bearing of the generator may be damaged; the problems of the power steering pump and water pump will basically cause similar noise. There is dirt in the engine. It is recommended to change the oil, filter the engine, and clean the engine.

The sound is disordered when it is maintained at a certain speed, and a short sound is made one after another when it slows down sharply. The reasons for the sound are: the timing gear of the camshaft is broken or the fixed nut is loose; the crankshaft is broken; the piston pin bushing is loose; the axial clearance of the camshaft is too large or the bushing is loose.

The increase in engine noise is generally caused by thinning of oil, excessive impurities, blockage of oil filter, and excessive carbon accumulation in the engine. This requires timely maintenance and oil replacement.ZotyeZ300 is Zotye's first A+ family car. It is built by Zotye Automobile in cooperation with many top parts suppliers around the world.

The solution to the vibration of the Zhongtai z300 engine is as follows: the engine abnormal sound indicates that the technical state of a certain mechanism of the engine has changed. It is caused by some parts that are even worn or improperly assembled and adjusted.

Is Zhongtai z100 a Suzuki engine?

The appearance of Zhongtai Z100 is very similar to Suzuki's new Otto, but the engine is different. Zhongtai Z100 uses a 0L inline 3-cylinder engine with a maximum power of 68 horsepower (50 kilowatts)/6200rpm and a peak torque of 90 Nm/3500-4000rpm.

The Zhongtai Z100 model is not a Suzuki engine. Although the appearance of the car is very similar to the Suzuki New Otto, the engine is different.

Zhongtai Z100. Zhongtai Z100 adopts a 0L naturally aspirated engine independently developed by Zhongtai Company. At the same time, it is supplemented by BOSCH to provide an electronic fuel injection system, which can achieve accurate and stable fuel injection and ignition, so that the fuel utilization rate is higher and more energy-saving. The antelope engine has low power, loud noise, and emits more pollutants.

The quality is better. The door of Zhongtai z100 is made of iron, which has sufficient strength and rigidity, and good anti-collision performance. The engine of this car adopts the Mitsubishi 4G13S series, which is high-pressure casting aluminum alloy cylinder block, electronically controlled fuel injection, independent ignition coil and other advanced technologies, with high technical content, so Zhongtai z100 is of better quality.

How about Zhongtai z100?

Good. Zhongtai z100 is of good quality. The door of Zhongtai z100 is made of iron, with sufficient strength and rigidity, and good anti-collision performance.

Reliable and durable: Zhongtai z100 is made of high-quality materials and advanced technology. They have undergone strict testing and quality control to ensure that each car has stable performance and excellent durability. During the production process, Zhongtai conducts multiple tests and verifications on key components, and conducts long-term continuous operation tests.

Good. According to the query of Pacific Automobile Network, Zhongtai z100 has strong mechanical properties, good comfort and excellent safety performance, which can meet the needs. ZhongtaiThe z100 performs well in appearance, power, interior and safety, and is a cost-effective model.

Good. According to the query of Dianping.com. The minimum ground clearance of Zhongtai Z200 reaches 190mm, which makes the driver's front vision quite wide. The high chassis of Zhongtai z100 creates high passability, which can easily complete the passing task of wading roads and potholes. So Zhongtai z100 is of good quality.

Zhongtai z100 is good. Quality: The whole Zhongtai z100 adopts a high-strength body and a collapsed energy-absorbing space design, which is of good quality and durable. The quality and durability of Otto are not as good as those of Zhongtai z100. Price: Alto is relatively expensive, while Zhongtai z100 is reasonable and cost-effective.

How about the quality of Zhongtai z100

1. The quality is better. The door of Zhongtai z100 is made of iron, which has sufficient strength and rigidity, and good anti-collision performance. The engine of this car adopts the Mitsubishi 4G13S series, which is high-pressure casting aluminum alloy cylinder block, electronically controlled fuel injection, independent ignition coil and other advanced technologies, with high technical content, so Zhongtai z100 is of better quality.

2. This car is of good quality. Zhongtai Z100 is a brand-new masterpiece created by Zhongtai Company in 2013. The minimum ground clearance of Zhongtai Z200 reaches 190mm, which makes the driver's forward vision quite wide. The high chassis creates high passability. Zhongtai Z200 has easily completed the passage of wading roads and potholes. Affairs.

3. Reliable and durable: Zhongtai z100 is manufactured with high-quality materials and advanced technology. They have undergone strict testing and quality control to ensure that each car has stable performance and excellent durability. During the production process, Zhongtai conducts multiple tests and verifications on key components, and conducts long-term continuous operation tests.

4. OK. According to the query of Dianping.com. The minimum ground clearance of Zhongtai Z200 reaches 190mm, which makes the driver's front vision quite wide. The high chassis of Zhongtai z100 creates high passability, which can easily complete the passing task of wading roads and potholes. So Zhongtai z100 is of good quality.

5. OK. According to the query of Pacific Automobile Network, Zhongtai z100 has strong mechanical properties, good comfort and excellent safety performance, which can meet the needs.Zhongtai z100 performs well in appearance, power, interior and safety, and is a cost-effective model.

6. This design can improve the durability of the vehicle and have better collision resistance in unexpected situations. Iron door: The door of Zhongtai Z100 is made of iron, which has sufficient strength and rigidity to provide better anti-collision performance.