There are four ways to input the ez2 one s file of the new algebraic car system. Manual input: Manually enter the code of the S file in the editor of EZ2, which is suitable for users who are familiar with the syntax of the S file. File import: Import the written S file into EZ2, which is suitable for users who already have S files.
The positioning of the knife holder should be abnormal. Try other ways to reposition it: hit the meter and hit the spindle to jump. The spindle is large and small for a while, and it is useless to do it. This is a problem of the accuracy of the machine tool. It depends on whether there is an error in the outer diameter size or the horizontal size.
Throttle valve problem The most common reason for car jitter may be excessive throttle valve and too much carbon in the fuel injector.
At this time, as long as the O/D switch is turned off and the use of the overspeed gear is restricted, the car can stably go uphill in the 3rd gear without forming a "cyclic jump". If the ramp is steeper and the automatic transmission forms a "circular jump" between the 3rd and 2nd gears, the gear lever should be placed in the 2nd gear, so that the automatic transmission can be stable in the 2nd gear.
Turn off hibernation, open [Control Panel] [Power Options] [Hibernation] in turn, and uncheck [Enable Hibernation].
SYNTEC refers to Taiwan's new generation SYNTEC industrial control system. The new generation of products covers lathe and milling machine controller and industrial machinery controller. At present, it is the professional PC-based CNC controller brand with the most complete product line and the most development potential in China.
New generation system SYNTEC: Parameter modification: On the first page, press the rightmost or leftmost button under the display, and the "Parameter Settings" button appears. Find the parameter to be changed. When you need to enter the password, enter the parameter password "520".
Control button. The new generation system teach is a robot controller used to control the movement and operation of the robot.Teach is the abbreviation of teaching in English, which means teaching, because it can teach and control robots through handles or keyboards.
It can carry out end milling, drilling, expansion, boring, tapping and other processing processes. It has a wide range of uses, especially suitable for processing various three-dimensional convex and convex models with complex shapes and complex cavities and surfaces. It is more suitable for batch processing parts in enterprise production workshops.
The new generation system is developed on the basis of the traditional numerical control system. It adopts more advanced hardware and software technology, has stronger computing and processing capabilities, and has higher accuracy and stability.
There are many ways to process mechanical parts in modern machinery manufacturing: in addition to cutting, there are also casting, forging, welding, stamping, extrusion, etc., but all of them are fineParts with high degree requirements and fine surface roughness requirements generally need to be finally processed by cutting on the machine tool.
1. SYNTEC is the CNC system of Suzhou New Generation CNC Equipment Co., Ltd.
2. The numerical control system is the abbreviation of the digital control system. The English name is (Numerical Control System). According to the control program stored in the computer memory, it performs part or all of the numerical control functions, and is equipped with an interface circuit and servo drive installation. Set up a dedicated computer system.
3. SYNTEC numerical control system. Santos CNC machine tool, equipped with SYNTEC numerical control system, the main circuit of the CNC lathe has a spindle motor, which is used to achieve spindle rotation and feed movement, followed by a cooling pump motor and a sliding plate fast-moving motor.
4. Syntec is a new generation of CNC Co., Ltd. Founded in 1995, New Generation CNC Co., Ltd. is a professional PC-based digital controller manufacturer. It has been engaged in software and hardware technology research and development of machine tool controllers for a long time, and is committed to expanding the cross-strait market.
Method 1: You can use the basic instruction G01 to complete the chamfer. First, let the tool move to the starting point of the chamfer, and then use the following instructions.G01 X Z F X, Z is the coordinate value of the camfer end point, and F is the feed quantity. Method 2: Use direct drawing programming method. If it is 45 shamfer, use the following format.
Automatic camfering and rounded corner instruction format of the machine tool, straight line to straight line. A straight line connects an arc. The arc is connected to a straight line. The arc is connected to the arc.
The degree of chamfer is simple, take an outer circle with a diameter of 60MM and give it a chamfer of 2MM. First of all, subtract 4MM from the diameter (the X axis of the machine tool is the diameter programming, and if it is a radius programming, subtract 2MM) The program is: G00X56, Z0. G01X60Z-2, F0.1.
U5 W F100 G01 code is used for linear interpolation movement of the tool. Function: G01 instruction makes the tool move straight to the target point from the point at a certain feed speed.
If it is a 45° camfer, G00 X__ Z__; after positioning, G1 X__ Z__ F__; that is, X Z moves at the same time, and the X value is twice that of Z.
Straight line backward inverted right angle Format: G01X (U)_ Z (W)_ C_; Function: straight line backward inverted right angle, instructing the tool from point A to point B, and then to point C.
1. Use the same. It mainly depends on your own usage requirements. If it is a machine with the same accessories and the same factory, you can't feel the difference if you use it normally. The main difference is that the new generation system is a bargain, and the equipment using the new generation system is also a bargain, which is naturally poor in all aspects.
2. So far, lathes, milling machines, grinding machines and other tool controllers have been successfully developed. The open architecture system with the general-purpose industrial controller as the core adopts an open architecture based on the general-purpose 32-bit industrial controller and DOS platform, which is easy to maintain and update the system, and has good reliability. The two can't be compared to which one is troublesome, and each has its own advantages and advantages.
3. I have 3 machines, both Vihong and the new generation. Vihong is easy to operate and simple to use. Novices use Weihong quickly, but they need a computer belt. Sometimes it crashes in summer. The new generation is relatively sensitive and can call the police if there is a problem. Personally, I think the new generation is good.
4. In terms of processing finish, the new generation is better. The ordinary processing method is faster than the new generation, but if you have 3D accuracy requirements, the new generation is not as good as Frank, and Frank's 3D is more guaranteed.FANUC system is a common CNC machine tool program in the CNC machine tool workshop. Its operation panel is simple and easy to understand.
5. It has its own characteristics and some shortcomings. Whether it's good or not depends on the actual situation. It is enough to process products, but more depends on operation and programming.
6. The new generation system is better than the Huazhong system. The cost performance of the new generation system is better, using the Snapdragon 870 processor. The Huazhong system adopts the Snapdragon 778g processor, and the performance of the new generation system is about 20% better than that of the Huazhong system.
Data-driven multimodal transport decisions-APP, download it now, new users will receive a novice gift pack.
There are four ways to input the ez2 one s file of the new algebraic car system. Manual input: Manually enter the code of the S file in the editor of EZ2, which is suitable for users who are familiar with the syntax of the S file. File import: Import the written S file into EZ2, which is suitable for users who already have S files.
The positioning of the knife holder should be abnormal. Try other ways to reposition it: hit the meter and hit the spindle to jump. The spindle is large and small for a while, and it is useless to do it. This is a problem of the accuracy of the machine tool. It depends on whether there is an error in the outer diameter size or the horizontal size.
Throttle valve problem The most common reason for car jitter may be excessive throttle valve and too much carbon in the fuel injector.
At this time, as long as the O/D switch is turned off and the use of the overspeed gear is restricted, the car can stably go uphill in the 3rd gear without forming a "cyclic jump". If the ramp is steeper and the automatic transmission forms a "circular jump" between the 3rd and 2nd gears, the gear lever should be placed in the 2nd gear, so that the automatic transmission can be stable in the 2nd gear.
Turn off hibernation, open [Control Panel] [Power Options] [Hibernation] in turn, and uncheck [Enable Hibernation].
SYNTEC refers to Taiwan's new generation SYNTEC industrial control system. The new generation of products covers lathe and milling machine controller and industrial machinery controller. At present, it is the professional PC-based CNC controller brand with the most complete product line and the most development potential in China.
New generation system SYNTEC: Parameter modification: On the first page, press the rightmost or leftmost button under the display, and the "Parameter Settings" button appears. Find the parameter to be changed. When you need to enter the password, enter the parameter password "520".
Control button. The new generation system teach is a robot controller used to control the movement and operation of the robot.Teach is the abbreviation of teaching in English, which means teaching, because it can teach and control robots through handles or keyboards.
It can carry out end milling, drilling, expansion, boring, tapping and other processing processes. It has a wide range of uses, especially suitable for processing various three-dimensional convex and convex models with complex shapes and complex cavities and surfaces. It is more suitable for batch processing parts in enterprise production workshops.
The new generation system is developed on the basis of the traditional numerical control system. It adopts more advanced hardware and software technology, has stronger computing and processing capabilities, and has higher accuracy and stability.
There are many ways to process mechanical parts in modern machinery manufacturing: in addition to cutting, there are also casting, forging, welding, stamping, extrusion, etc., but all of them are fineParts with high degree requirements and fine surface roughness requirements generally need to be finally processed by cutting on the machine tool.
1. SYNTEC is the CNC system of Suzhou New Generation CNC Equipment Co., Ltd.
2. The numerical control system is the abbreviation of the digital control system. The English name is (Numerical Control System). According to the control program stored in the computer memory, it performs part or all of the numerical control functions, and is equipped with an interface circuit and servo drive installation. Set up a dedicated computer system.
3. SYNTEC numerical control system. Santos CNC machine tool, equipped with SYNTEC numerical control system, the main circuit of the CNC lathe has a spindle motor, which is used to achieve spindle rotation and feed movement, followed by a cooling pump motor and a sliding plate fast-moving motor.
4. Syntec is a new generation of CNC Co., Ltd. Founded in 1995, New Generation CNC Co., Ltd. is a professional PC-based digital controller manufacturer. It has been engaged in software and hardware technology research and development of machine tool controllers for a long time, and is committed to expanding the cross-strait market.
Method 1: You can use the basic instruction G01 to complete the chamfer. First, let the tool move to the starting point of the chamfer, and then use the following instructions.G01 X Z F X, Z is the coordinate value of the camfer end point, and F is the feed quantity. Method 2: Use direct drawing programming method. If it is 45 shamfer, use the following format.
Automatic camfering and rounded corner instruction format of the machine tool, straight line to straight line. A straight line connects an arc. The arc is connected to a straight line. The arc is connected to the arc.
The degree of chamfer is simple, take an outer circle with a diameter of 60MM and give it a chamfer of 2MM. First of all, subtract 4MM from the diameter (the X axis of the machine tool is the diameter programming, and if it is a radius programming, subtract 2MM) The program is: G00X56, Z0. G01X60Z-2, F0.1.
U5 W F100 G01 code is used for linear interpolation movement of the tool. Function: G01 instruction makes the tool move straight to the target point from the point at a certain feed speed.
If it is a 45° camfer, G00 X__ Z__; after positioning, G1 X__ Z__ F__; that is, X Z moves at the same time, and the X value is twice that of Z.
Straight line backward inverted right angle Format: G01X (U)_ Z (W)_ C_; Function: straight line backward inverted right angle, instructing the tool from point A to point B, and then to point C.
1. Use the same. It mainly depends on your own usage requirements. If it is a machine with the same accessories and the same factory, you can't feel the difference if you use it normally. The main difference is that the new generation system is a bargain, and the equipment using the new generation system is also a bargain, which is naturally poor in all aspects.
2. So far, lathes, milling machines, grinding machines and other tool controllers have been successfully developed. The open architecture system with the general-purpose industrial controller as the core adopts an open architecture based on the general-purpose 32-bit industrial controller and DOS platform, which is easy to maintain and update the system, and has good reliability. The two can't be compared to which one is troublesome, and each has its own advantages and advantages.
3. I have 3 machines, both Vihong and the new generation. Vihong is easy to operate and simple to use. Novices use Weihong quickly, but they need a computer belt. Sometimes it crashes in summer. The new generation is relatively sensitive and can call the police if there is a problem. Personally, I think the new generation is good.
4. In terms of processing finish, the new generation is better. The ordinary processing method is faster than the new generation, but if you have 3D accuracy requirements, the new generation is not as good as Frank, and Frank's 3D is more guaranteed.FANUC system is a common CNC machine tool program in the CNC machine tool workshop. Its operation panel is simple and easy to understand.
5. It has its own characteristics and some shortcomings. Whether it's good or not depends on the actual situation. It is enough to process products, but more depends on operation and programming.
6. The new generation system is better than the Huazhong system. The cost performance of the new generation system is better, using the Snapdragon 870 processor. The Huazhong system adopts the Snapdragon 778g processor, and the performance of the new generation system is about 20% better than that of the Huazhong system.
Trade data-driven investment strategies
author: 2024-12-23 23:53HS code-driven tariff equalization
author: 2024-12-23 23:31Real-time freight cost analysis
author: 2024-12-23 22:35Trade data for pharmaceuticals supply chain
author: 2024-12-23 22:07HS code alignment with labeling standards
author: 2024-12-23 22:57Predictive supplier scoring algorithms
author: 2024-12-23 21:55Locating specialized suppliers by HS code
author: 2024-12-23 21:48Real-time customs tariff analysis
author: 2024-12-23 21:44HS code-based risk profiling for exporters
author: 2024-12-23 21:24
Predictive trade data cleaning
916.96MB
Check
Top trade research databases
397.52MB
Check
Livestock feed HS code references
641.57MB
Check
How to access global trade archives
557.33MB
Check
HS code mapping to non-tariff measures
621.44MB
Check
Apparel import export statistics
945.96MB
Check
Real-time HS code tariff updates for ASEAN
969.55MB
Check
Global trade compliance certifications
888.71MB
Check
Comparative supplier performance data
418.65MB
Check
Best global trade intelligence for SMEs
675.84MB
Check
Predictive trade data cleaning
337.87MB
Check
How to manage cross-border complexity
779.31MB
Check
Leather goods HS code classification
533.89MB
Check
Biofuels HS code classification
145.65MB
Check
Meat and poultry HS code references
719.81MB
Check
Trade data-based price benchmarks
681.75MB
Check
Customs duty prediction models
962.21MB
Check
How to access restricted trade data
886.18MB
Check
HS code-based reclassification services
641.17MB
Check
HS code for artisanal goods
377.55MB
Check
Raw leather HS code references
125.94MB
Check
Furniture imports HS code analysis
668.66MB
Check
Real-time shipment inspection data
658.26MB
Check
Composite materials HS code research
449.65MB
Check
How to streamline customs clearance
112.21MB
Check
How to validate supplier compliance
531.58MB
Check
How to forecast trade demand spikes
582.55MB
Check
HS code-driven risk management frameworks
917.36MB
Check
Exporter data
834.91MB
Check
Data-driven export licensing compliance
696.78MB
Check
How to identify monopolistic suppliers
131.48MB
Check
HS code-focused compliance audits
249.62MB
Check
Dairy products HS code verification
622.42MB
Check
HS code segmentation for industrial chemicals
329.26MB
Check
HS code-driven cost variance analysis
392.65MB
Check
HS code-driven import quality checks
586.32MB
Check
Scan to install
Data-driven multimodal transport decisions to discover more
Netizen comments More
399 Latin America HS code classification
2024-12-23 23:19 recommend
179 HS code-based quality control checks
2024-12-23 23:02 recommend
269 Cross-verifying suppliers by HS code
2024-12-23 22:38 recommend
606 West African HS code trade guides
2024-12-23 22:09 recommend
146 Deriving product origin via HS code
2024-12-23 21:29 recommend