1. The engine does not have a normal recovery temperature. The reaction is that when the engine is cold started, the temperature is relatively low at this time, and the oil in the engine, because of the long parking time, all flows back to the inside of the oil sall, so this phenomenon occurs.
2. This is because when the cold car starts, the automatic air valve closes, the mixed gas is thickened (conducive to starting), the idle speed is increased, and the sound becomes louder. Secondly, the lubrication system has just started to work, and the parts that need to be lubricated have not been fully lubricated, which also leads to loud noise. A moment after starting, the air valve opens, the idling speed drops, and the lubrication is positive Chang, the voice is quieter.
3. Only when the engine speed is high can it warm up quickly. Many cars will make a loud noise when they first start, and after one time, the sound will gradually become smaller, because the car starts when it is cold. The engine speed is too high, so it will produce a relatively loud noise.
1. The loud cold start noise is due to the fact that the engine has not been fully lubricated at this time. After the engine is fully lubricated and reaches the normal working temperature, the noise of the engine will be much smaller.
2. The loud cold start noise is caused by the fact that the engine is not fully lubricated at this time. After the engine is fully lubricated and reaches the normal working temperature, the noise of the engine will be much smaller.
3. The reason for the "da-da" sound when the cold car starts Hydraulic support: due to the low oil pressure or the wear of the hydraulic support itself, air enters the hydraulic support, resulting in a "da-da" sound. VALVE GAP: THE VALVE ROCKER ARM IS WORN, RESULTING IN TOO LARGE VALVE GAP.
4. The most likely time to happen is when the engine is hot, or cold, or when there is a shortage of oil.The reasons for this kind of problem can be divided into air filter, spark plug, ignition line, gasoline, gasoline filter, gasifier, oil pump and other problems.
5. The cold start noise is very loud, because the engine is not fully lubricated. After the engine is fully lubricated and reaches the normal working temperature, the engine noise will be much smaller. During cold start, the engine oil is in the oil sup shell, with high viscosity and poor fluidity, resulting in insufficient engine lubrication. 99% of engine wear occurs at the cold start time.
1. As for others, it may be internal problems in the engine, such as EGR valve blockage. 3. The engine has a hissing sound, with steam or airIt's like coming out of the engine. Generally, after hearing this sound, the engine will quickly lose power. There may be a problem. The engine is overheated. Check the cooling system.
2. The reasons are as follows: it is not lubricated enough when the cold car starts, and the hydraulic column and mechanical rocker arm do not work properly, resulting in a rattling sound. The condition of the oil is not right: if the viscosity of the oil is too high or too low, the engine will make noise. The belt is not elastic enough: the engine makes a squeaky sound at work.
3. The reason why the car starts loudly may be that too much oil increases the stirring resistance of the crankshaft connecting rod, and the noise will also increase. If there is too much engine oil, the oil will cause unnecessary resistance to the rotation of the crankshaft, resulting in loud noise when the car starts, which will also affect the power output and increase fuel consumption. Other reasons: the machine foot glue is aging or loose.
4. It is caused by the carbon accumulation of the engine. Because the old engine oil is getting thinner and thinner, the carbon accumulates more and more. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
Trade data for industrial machinery-APP, download it now, new users will receive a novice gift pack.
1. The engine does not have a normal recovery temperature. The reaction is that when the engine is cold started, the temperature is relatively low at this time, and the oil in the engine, because of the long parking time, all flows back to the inside of the oil sall, so this phenomenon occurs.
2. This is because when the cold car starts, the automatic air valve closes, the mixed gas is thickened (conducive to starting), the idle speed is increased, and the sound becomes louder. Secondly, the lubrication system has just started to work, and the parts that need to be lubricated have not been fully lubricated, which also leads to loud noise. A moment after starting, the air valve opens, the idling speed drops, and the lubrication is positive Chang, the voice is quieter.
3. Only when the engine speed is high can it warm up quickly. Many cars will make a loud noise when they first start, and after one time, the sound will gradually become smaller, because the car starts when it is cold. The engine speed is too high, so it will produce a relatively loud noise.
1. The loud cold start noise is due to the fact that the engine has not been fully lubricated at this time. After the engine is fully lubricated and reaches the normal working temperature, the noise of the engine will be much smaller.
2. The loud cold start noise is caused by the fact that the engine is not fully lubricated at this time. After the engine is fully lubricated and reaches the normal working temperature, the noise of the engine will be much smaller.
3. The reason for the "da-da" sound when the cold car starts Hydraulic support: due to the low oil pressure or the wear of the hydraulic support itself, air enters the hydraulic support, resulting in a "da-da" sound. VALVE GAP: THE VALVE ROCKER ARM IS WORN, RESULTING IN TOO LARGE VALVE GAP.
4. The most likely time to happen is when the engine is hot, or cold, or when there is a shortage of oil.The reasons for this kind of problem can be divided into air filter, spark plug, ignition line, gasoline, gasoline filter, gasifier, oil pump and other problems.
5. The cold start noise is very loud, because the engine is not fully lubricated. After the engine is fully lubricated and reaches the normal working temperature, the engine noise will be much smaller. During cold start, the engine oil is in the oil sup shell, with high viscosity and poor fluidity, resulting in insufficient engine lubrication. 99% of engine wear occurs at the cold start time.
1. As for others, it may be internal problems in the engine, such as EGR valve blockage. 3. The engine has a hissing sound, with steam or airIt's like coming out of the engine. Generally, after hearing this sound, the engine will quickly lose power. There may be a problem. The engine is overheated. Check the cooling system.
2. The reasons are as follows: it is not lubricated enough when the cold car starts, and the hydraulic column and mechanical rocker arm do not work properly, resulting in a rattling sound. The condition of the oil is not right: if the viscosity of the oil is too high or too low, the engine will make noise. The belt is not elastic enough: the engine makes a squeaky sound at work.
3. The reason why the car starts loudly may be that too much oil increases the stirring resistance of the crankshaft connecting rod, and the noise will also increase. If there is too much engine oil, the oil will cause unnecessary resistance to the rotation of the crankshaft, resulting in loud noise when the car starts, which will also affect the power output and increase fuel consumption. Other reasons: the machine foot glue is aging or loose.
4. It is caused by the carbon accumulation of the engine. Because the old engine oil is getting thinner and thinner, the carbon accumulates more and more. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
International trade knowledge base
author: 2024-12-24 02:49Export subsidies linked to HS codes
author: 2024-12-24 01:44How to analyze import export documentation
author: 2024-12-24 01:38Global HS code repository access
author: 2024-12-24 01:18Middle East trade compliance platform
author: 2024-12-24 01:03HS code-based customs broker RFPs
author: 2024-12-24 03:07Locating specialized suppliers by HS code
author: 2024-12-24 02:58Pharma finished goods HS code references
author: 2024-12-24 02:13Global HS code repository access
author: 2024-12-24 02:00Real-time customs data reports
author: 2024-12-24 01:16812.69MB
Check843.34MB
Check295.32MB
Check149.46MB
Check879.47MB
Check583.98MB
Check767.47MB
Check352.22MB
Check383.77MB
Check832.55MB
Check611.16MB
Check131.82MB
Check334.93MB
Check926.48MB
Check197.61MB
Check622.84MB
Check838.77MB
Check822.75MB
Check316.26MB
Check778.47MB
Check369.18MB
Check232.72MB
Check698.87MB
Check579.21MB
Check236.89MB
Check178.39MB
Check138.37MB
Check716.43MB
Check336.73MB
Check834.74MB
Check133.44MB
Check723.37MB
Check652.73MB
Check943.51MB
Check985.31MB
Check415.87MB
CheckScan to install
Trade data for industrial machinery to discover more
Netizen comments More
404 Export compliance automation
2024-12-24 02:53 recommend
1837 Global trade intelligence for banking
2024-12-24 02:14 recommend
982 HS code-driven import quality checks
2024-12-24 01:54 recommend
680 How to comply with global trade regulations
2024-12-24 01:24 recommend
1169 HS code-based trade route profitability
2024-12-24 00:50 recommend