1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
*Logistics optimization by HS code-APP, download it now, new users will receive a novice gift pack.
1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
*HS code-based KPI reporting for trade teams
author: 2024-12-24 00:17Best global trade intelligence tools
author: 2024-12-23 22:44Packaging industry HS code references
author: 2024-12-23 21:54HS code-driven route selection
author: 2024-12-23 23:47End-to-end shipment tracking solutions
author: 2024-12-23 23:24Top supply chain intelligence providers
author: 2024-12-23 23:24How to leverage big data in trade
author: 2024-12-23 23:00Exotic textiles HS code classification
author: 2024-12-23 22:45333.67MB
Check787.75MB
Check764.54MB
Check827.19MB
Check762.15MB
Check451.38MB
Check213.81MB
Check117.75MB
Check267.21MB
Check624.79MB
Check345.89MB
Check511.46MB
Check787.13MB
Check242.77MB
Check169.14MB
Check662.92MB
Check859.23MB
Check545.91MB
Check376.94MB
Check348.57MB
Check117.33MB
Check861.72MB
Check513.99MB
Check259.96MB
Check487.12MB
Check821.19MB
Check159.73MB
Check177.11MB
Check938.56MB
Check415.85MB
Check779.67MB
Check624.81MB
Check143.36MB
Check481.55MB
Check397.11MB
Check245.62MB
CheckScan to install
Logistics optimization by HS code to discover more
Netizen comments More
1663 Supplier relationship management with trade data
2024-12-24 00:18 recommend
1267 India HS code-based product analysis
2024-12-24 00:10 recommend
321 Dairy powder HS code references
2024-12-23 23:16 recommend
1989 Furniture imports HS code analysis
2024-12-23 22:34 recommend
1508 Optimizing distribution using HS code data
2024-12-23 22:18 recommend